نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 3.5 inch SATA hard drive with circuit board visible

Epoch

Epoch 8TB 7.2K SATA 3.5" internal hard drive

SKU CH-5CFR-5H1YA

8 TB SATA 3.5" 7200 RPM drive built for Dell PowerEdge 12, 13 and 14 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8TB capacity stores large server datasets
  • 7200 RPM spindle speed delivers responsive throughput
  • SATA 6Gb/s interface connects directly to server backplanes
  • 5-inch form factor fits standard drive bays
  • Validated across Dell PowerEdge 12 13 14 generation and Tower servers

8TB SATA drive for server arrays

The Epoch 8TB 7.2K SATA 3.5" internal hard drive is built for Dell PowerEdge and Tower servers across generations 12, 13 and 14. It fits 3.5" bays in models such as the R220 through R930 and T20 through T440. The drive targets administrators who need bulk capacity in compatible enterprise chassis.

Sustained 7200 RPM throughput

Spinning at 7200 RPM, the drive maintains consistent transfer rates over long write and rebuild windows rather than peaking only in short bursts. The SATA 6Gb/s interface keeps the data path steady during RAID reconstruction, backup jobs and archival workloads. Enterprise-grade firmware helps the drive tolerate the vibration and duty cycles found in multi-drive enclosures.

8TB capacity decides fit

The single specification that determines suitability is the 8TB capacity; if your array requires larger or smaller volumes this is not the correct part. The 3.5" form factor and SATA interface are fixed, so the drive only fits bays and controllers that accept those exact parameters. Buyers who need a different capacity must select another model.

أبرز المميزات

  • 8TB capacity stores large server datasets
  • 7200 RPM spindle speed delivers responsive throughput
  • SATA 6Gb/s interface connects directly to server backplanes
  • 5-inch form factor fits standard drive bays
  • Validated across Dell PowerEdge 12 13 14 generation and Tower servers

المواصفات

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

أسئلة حول هذا المنتج

How loud or warm does the 7200 RPM 3.5" SATA drive get during continuous server use?

The 7200 RPM spindle produces typical enterprise-grade acoustics and heat; mount it in a server chassis with active airflow to keep temperatures within normal operating limits.

Which server backplane or controller do I need already installed to use this 8TB SATA 6Gb/s drive?

A standard 3.5" SATA 6Gb/s backplane or HBA in a compatible Dell PowerEdge 12G, 13G or Tower 12G, 14G server is required for the drive to function.

Will this 8TB SATA replacement kit work in my older Dell PowerEdge R720 alongside existing 2TB drives?

Yes, the drive uses the same SATA 6Gb/s interface and 3.5" form factor, so it installs in the same bays and the controller will recognise the larger capacity automatically.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.