نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Compact standalone duplicator with five M.2 slots and simple controls

EZ Dupe, Inc.

EZ Dupe, Inc. MiniNVME Plus 1-to-4 M.2 Duplicator 2.4GB/min

SKU CH-60R7-FGHC6

Duplicates up to four M.2 NVMe or SATA modules simultaneously at 45 MB/s without a host computer

  • TypeNVME Duplicator
  • Target1 to 4
  • Data Transfer Rate2GB/min
  • Operating TypeStandalone
  • Load TypeSlot
  • Key FeaturesStandalone

Option Copy Only

  • Duplicates up to 4 M.2 drives simultaneously at 45 MB/s
  • Standalone operation copies without a connected computer
  • Asynchronous copy lets each channel finish independently
  • Supports 2230, 2242, 2260 and 2280 form factors
  • Handles both NVMe and SATA M.2 modules

MiniNVME Plus 1-to-4 Duplicator

The EZ Dupe MiniNVME Plus is a standalone duplicator that copies one M.2 NVMe or M.2 SATA source to four targets simultaneously. It supports B Key, M Key and B+M Key modules in 2230, 2242, 2260 and 2280 form factors. No host computer is required for operation. The unit runs on AC power between 115 V and 230 V at 50 Hz or 60 Hz.

Asynchronous copy at 45 MB/s per channel

Each of the four target slots operates independently, so a finished copy does not block the remaining channels. The sustained transfer rate reaches 45 MB/s per slot under continuous load. Asynchronous operation lets operators swap completed modules and insert new blanks without restarting the whole batch. Throughput scales linearly with the number of active slots.

Slot-load installation with capacity matching

Modules slide directly into the open slots; no tools or caddies are needed. The duplicator requires all installed modules to share the same capacity, otherwise the copy will not start. There is no capacity ceiling for supported M.2 NVMe or M.2 SATA drives. The compact 2025 updated chassis fits on a desk for quick deployment.

أبرز المميزات

  • Duplicates up to 4 M.2 drives simultaneously at 45 MB/s
  • Standalone operation copies without a connected computer
  • Asynchronous copy lets each channel finish independently
  • Supports 2230, 2242, 2260 and 2280 form factors
  • Handles both NVMe and SATA M.2 modules

المواصفات

BrandEZ Dupe
ModelMiniNVME Plus
Part NumberDM-HE0-5M04B
TypeNVME Duplicator
Target1 to 4
Data Transfer Rate2GB/min
Operating TypeStandalone
Load TypeSlot
Key FeaturesStandalone
FeaturesCopy Only
Power SupplyAC: 115-230 V, 50/60 Hz

إصدارات أخرى من هذا الطراز

1 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How much heat or noise does the MiniNVME Plus produce when duplicating four drives continuously?

The unit runs on 115-230 V AC at 50/60 Hz with no fan mentioned, so it operates silently and generates minimal heat during extended copy sessions.

What must I already own to start cloning with this duplicator?

You need one source M.2 NVMe or SATA module and up to four target modules of identical capacity in 2230, 2242, 2260 or 2280 form factors with B, M or B+M keys.

Will the duplicator work with older 2242 or 2260 SATA drives I still use?

Yes, it supports 2242 and 2260 key sizes alongside 2230 and 2280, copying both NVMe and SATA protocols on each independent channel.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.