نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
13-piece nozzle cleaning kit with .4 mm needles, copper brush, two tweezers, storage box

FENGWANGLI FWL-QL3 13-piece 3D printer nozzle cleaning kit with .4 mm needles

SKU CH-T215-HCJMB

Clears blocked nozzles with ten 0.4 mm stainless-steel pins, copper brush and two anti-static tweezers in a storage box

  • TypeFWL-QL3
  • Clears nozzle blockages with ten .4 mm stainless-steel needles
  • Copper wire brush removes residue from feed gears and radiator fins
  • Two anti-static tweezer styles grip surplus filament without magnetic interference
  • Needles stay flexible and resist snapping during repeated high-temp use
  • Compact storage box keeps all 13 pieces organised and ready

13-piece nozzle cleaning kit for 3D printers

This 13-piece kit from FENGWANGLI supplies the tools needed to clear clogged nozzles and perform routine maintenance on most common 3D printers. It includes ten 0.4 mm stainless steel cleaning pins, a copper wire brush, two styles of anti-static precision tweezers, and a storage box. The pins are made from high-quality stainless steel with smooth, sharp tips for strength and flexibility during use.

Accessories enable targeted cleaning

The copper wire brush tackles residue on feed gears and other hard-to-reach areas, while the curved, non-magnetic tweezers allow precise handling of hot nozzle components and surplus filament. A storage box keeps all 13 pieces organised and protected between maintenance sessions, reducing the risk of lost or damaged pins.

Suited for owners clearing 0.4 mm nozzle blockages

Makers who regularly print with standard 0.4 mm nozzles will find the pin diameter matched to their hardware. Users with larger or smaller nozzle diameters, or those needing automated cleaning systems, should look at alternative maintenance solutions.

أبرز المميزات

  • Clears nozzle blockages with ten .4 mm stainless-steel needles
  • Copper wire brush removes residue from feed gears and radiator fins
  • Two anti-static tweezer styles grip surplus filament without magnetic interference
  • Needles stay flexible and resist snapping during repeated high-temp use
  • Compact storage box keeps all 13 pieces organised and ready

المواصفات

BrandFENGWANGLI
ModelFWL-QL3
Part NumberFWL-QL3
TypeFWL-QL3

أسئلة حول هذا المنتج

How often should the 0.4 mm stainless steel cleaning needles be replaced?

The kit includes ten stainless steel needles; replace individual pins when tips deform or resistance increases during nozzle clearing.

What temperature limit must be observed before using the cleaning pins?

Heat the nozzle to 200 °C or above before inserting the 0.4 mm needles to avoid damaging the pin tips.

Does the copper wire brush get hot during extended cleaning sessions?

The brush is used on a heated nozzle at 200 °C; wear heat-resistant gloves and allow the brush to cool between passes.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.