نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Single black and red DDR4 stick with low-profile heat spreader, 288 pins, CL16 timing

G.SKILL

G.SKILL Aegis F4-3000C16S-8GISB 8GB DDR4 3000 CL16 desktop RAM

SKU CH-R8X0-J8WM6 MPN F4-3000C16S-8GISB

8GB DDR4 desktop module running at 3000 MT/s with CL16 timing and Intel XMP 2.0 support

  • Capacity8GB
  • Type288-Pin PC RAM
  • SpeedDDR4 3000 (PC4 24000)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 8GB

Speed DDR4 3000 (PC4 24000)

CAS Latency CL16

  • 8 GB capacity adds responsive multitasking headroom for gaming and productivity
  • DDR4 3000 speed with CL16 16-18-18-38 timing delivers quick data access
  • 35 V operation keeps power draw low while maintaining stability
  • Intel XMP 2.0 profile enables one-click overclock on supported platforms
  • Black and red heat spreader provides style and thermal protection

8GB DDR4-3000 module for desktop builds

This 8GB DDR4 stick runs at 3000 MT/s with timings of 16-18-18-38 and a CAS latency of 16. It operates at 1.35V and uses the standard 288-pin unbuffered form factor. The module carries Intel XMP 2.0 profiles for simple configuration on supporting motherboards.

Thermals noise and power at stock settings

The low-profile heatspreader in black and red dissipates heat without active cooling, so the module adds no fan noise. At the rated 1.35V the power draw stays modest and suits typical desktop workloads. No additional airflow beyond normal case ventilation is required.

Intel XMP 2.0 profile for one-click setup

The kit includes an XMP 2.0 profile that sets 3000 MT/s, CL16 and 1.35V automatically on compatible Intel Z270, Z370, Z390, Z490, Z590, Z690 DDR4 or X299 platforms. AMD X570 boards also support the profile. Do not mix this stick with other kits; matched sets are validated to run together.

أبرز المميزات

  • 8 GB capacity adds responsive multitasking headroom for gaming and productivity
  • DDR4 3000 speed with CL16 16-18-18-38 timing delivers quick data access
  • 35 V operation keeps power draw low while maintaining stability
  • Intel XMP 2.0 profile enables one-click overclock on supported platforms
  • Black and red heat spreader provides style and thermal protection

المواصفات

BrandG.SKILL
SeriesAegis
ModelF4-3000C16S-8GISB
Capacity8GB
Type288-Pin PC RAM
SpeedDDR4 3000 (PC4 24000)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack / Red
FeaturesOverclock performance DDR4 memory designed for compatible Intel or AMD platforms.
Intel XMP 2.0 Support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock speed and system sta
Recommend UseAMD X570
Intel X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270
وزن الشحنة0.03 kg
أبعاد الطرد169 × 64 × 15 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will this single 8 GB stick work on a motherboard that only has two DDR4 slots?

Yes, the module is a standard 288-pin DDR4 DIMM and will install in any consumer board with DDR4 slots; using one stick leaves the second slot free for a future upgrade.

Does the XMP 2.0 profile load automatically on an AMD X570 board?

The kit is validated for AMD X570 platforms, so enabling XMP or DOCP in the BIOS will apply the 3000 MT/s CL16-18-18-38 timings at 1.35 V without manual tuning.

Can I add this stick to an existing 8 GB module from another kit to reach 16 GB?

G.SKILL advises against mixing kits because matched sets are tested to run together; combining different ICs or timings can cause instability even if the rated speed and latency appear identical.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.