EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
GAMDIAS Technology
Mid-tower ATX case with front mesh airflow, ARGB strip and rear fan, tempered glass side panel, supports 360 mm front radiator, GPU up to 260 mm, CPU cooler up to 160 mm
The AURA CG3 is a black mid-tower case that accepts standard ATX motherboards and targets builders who want a tidy mesh-front chassis with integrated lighting. A tempered glass side panel and front ARGB strip plus a rear 120 mm ARGB fan come fitted, and a top-mounted LED button cycles effects or syncs to a 5 V 3-pin motherboard header after a three-second hold. Two 3.5-inch and two 2.5-inch drive bays handle basic storage needs.
The mesh front aids airflow but the internal envelope caps graphics cards at 260 mm, CPU coolers at 160 mm and power supplies at 150 mm, so long triple-fan GPUs, tall tower coolers or deep ATX PSUs will not fit. Front-panel I/O provides one USB 3.0 port, two USB 2.0 ports and an HD audio jack, but no USB-C connection is present. Radiator support allows 240 mm at the front, 120 mm at the rear and 240 mm at the top, limiting liquid-cooling options to smaller loops.
Builders moving from tight micro-ATX cases gain a full-size ATX board area, a glass showcase panel and pre-installed ARGB lighting without buying extra fans or strips. The jump is worthwhile when the 260 mm GPU and 160 mm cooler ceilings still cover the intended parts; systems needing longer cards, taller coolers or a front USB-C port should look elsewhere.
| Brand | Gamdias |
|---|---|
| Series | AURA |
| Model | CG3 |
| Color | Black |
| LED | ARGB |
| Dust Filters | Top |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Front Ports | USB 2.0 / USB 3.0 / Audio |
| Max GPU Length | 260 mm |
| Max CPU Cooler Height | 160 mm |
| Max PSU Length | 150 mm |
| Dimensions | 352 x 200 x 442 mm |
| Weight | 4.9kg |
The case provides two internal 3.5 inch bays and two internal 2.5 inch bays, so you can install either mechanical drives or SSDs without needing extra brackets.
Any graphics card up to 260 mm long will fit; longer cards will not clear the internal layout.
Hold the LED button for three seconds to sync the front ARGB strip and rear fan to a motherboard 5 V 3 pin header, then manage effects through the board software.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟