OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
GAMEMAX
Full-tower ATX case with sound-dampened panels, three pre-installed 120 mm silent fans, top 360 mm radiator support, eight 3.5″ drive bays and 420 mm GPU clearance
The GAMEMAX Titan Silent 2 is a black ATX full-tower chassis built from .8 mm stamped steel with ABS and mesh accents. Both side panels carry sound-dampening material to reduce system noise. It accepts Micro-ATX, ATX, ITX and E-ATX motherboards and ships with three pre-installed 120 mm silent fans at the front and rear. The front I/O panel provides two USB 2.0 ports, two USB 3.0 ports, one Type C port and HD audio jacks.
Builders moving from a standard mid-tower with a windowed side panel gain eight 3.5-inch drive bays, two 2.5-inch bays and three external 5.25-inch bays. The top deck supports a 360 mm radiator or up to three 120 mm fans, while the front and bottom mount additional 120 mm units. A 420 mm graphics card and a 170 mm CPU cooler fit without modification. The jump is worth it when storage density and quiet operation matter more than tempered-glass aesthetics.
This case fits users who need E-ATX support, extensive hard-drive capacity and a subdued look for office or studio environments. The lack of a side window and the dampened panels keep visual and acoustic distraction low. Builders who want RGB showcases, tempered-glass panels or a compact footprint should look at something else.
| Brand | GAMEMAX |
|---|---|
| Series | Titan Silent 2 |
| Part Number | Titan Silent 2 |
| Type | ATX Full Tower |
| Color | Black |
| Case Material | ABS / Mesh / Metal |
| Motherboard Compatibility | Micro ATX / ATX / ITX / E-ATX |
| Side Panel | without Side Window |
| Dust Filters | Bottom / Top |
| Internal 3.5" Drive Bays | 8 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 8 |
| Fan Options | Bottom - 1 x 120mm / Front - 2 x 120mm / Rear - 1 x 120mm / Top - 2 x 140mm / Top - 3 x 120mm |
| Pre-installed Fans | Front - 2 x 120mm / Rear - 1 x 120mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 170 mm |
| وزن الشحنة | 10.84 kg |
| أبعاد الطرد | 607 × 582 × 287 mm |
The case supports GPUs up to 420 mm long, so a 4090 will fit with room to spare.
The front fans sit in the included 120 mm mounting points; remove the four corner screws on each fan, slide the fan to the desired slot, then re-secure with the same screws.
Check the bottom and top filters every month; pull them out, rinse with water, dry fully, and snap them back in to keep airflow unrestricted.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟