نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with M.2 slot and ventilation holes

GeeekPi N05 M.2 NVMe Adapter for Raspberry Pi 5

SKU CH-PTDA-HK020 MPN N05

Bottom-mounted adapter adds M.2 M-key NVMe storage to Raspberry Pi 5 with PCIe Gen 2.0 or optional Gen 3.0 speeds

  • Adds high-speed NVMe storage to Raspberry Pi 5
  • Supports M.2 M-key NVMe SSDs in 2230 2242 2260 2280 sizes
  • Certified PCIe 2.0 link with optional 3.0 mode
  • Bottom-mounted board keeps Pi 5 top side clear
  • Ventilation holes improve airflow for cooler operation

PCIe M.2 Adapter for Raspberry Pi 5

The GeeekPi N05 is a bottom-mounted peripheral board that adds an M.2 M-key NVMe slot to a Raspberry Pi 5. It connects through the board's PCIe interface using the supplied FPC cable and screw pack. The adapter is designed for makers and developers who want faster local storage on the Pi 5 platform.

Suits Pi 5 owners adding NVMe storage.

This adapter only fits the Raspberry Pi 5 in 4 GB or 8 GB variants and cannot be used with earlier Pi models or other single-board computers. Buyers who need a HAT-style top-mounted solution or an adapter for a different SBC should look elsewhere. The package includes the peripheral board, one FPC cable and a screw pack for assembly.

Certified PCIe Gen 2.0 link

The connection is certified for PCIe Gen 2.0 speed at 5 GT/sec and can be forced to Gen 3.0 at 10 GT/sec by editing the boot configuration. Stable Gen 3.0 operation depends on the specific SSD and requires testing. Supported drive form factors are 2230, 2242, 2260 and 2280 M-key NVMe modules.

أبرز المميزات

  • Adds high-speed NVMe storage to Raspberry Pi 5
  • Supports M.2 M-key NVMe SSDs in 2230 2242 2260 2280 sizes
  • Certified PCIe 2.0 link with optional 3.0 mode
  • Bottom-mounted board keeps Pi 5 top side clear
  • Ventilation holes improve airflow for cooler operation

المواصفات

BrandGeeekPi
ModelN07

أسئلة حول هذا المنتج

How can I verify the N07 board is running at PCIe Gen 2.0 speed after setup?

Run `lspci -vvv` on the Raspberry Pi 5 and check that the link speed shows 5 GT/sec for the NVMe device.

What comes in the box and is a Raspberry Pi 5 included?

The package contains the N07 peripheral board, one FPC cable and a screw pack; the Raspberry Pi 5 board is not included.

Which M.2 NVMe form factors does the N07 adapter accept?

The adapter supports M-key NVMe SSDs in 2230, 2242, 2260 and 2280 lengths.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.