نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Dual-fan graphics card with silver backplate, two 90mm fans, two HDMI and two DisplayPort outputs

GIGABYTE

GIGABYTE GV-N3050EAGLE OC-8GD GeForce RTX 3050 Eagle OC 8GB graphics card

SKU CH-TT4Y-3CKRV MPN GV-N3050EAGLE OC-8GD

Refurbished GeForce RTX 3050 with 8 GB GDDR6, WINDFORCE 2X cooling and 1792 MHz core clock

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 30 Series
  • GPUGeForce RTX 3050
  • ArchitectureAmpere
  • Core Clock1792 MHz
  • Ampere architecture drives real-time ray tracing with 2560 CUDA cores
  • 8 GB GDDR6 memory at 14000 MHz effective clock on a 128-bit bus
  • WINDFORCE 2X cooler uses alternate-spinning 90 mm fans and a protective back plate
  • PCIe 4.0 interface with HDMI 2.1 and DisplayPort 1.4a for 7680 x 4320 output
  • 130 W TDP needs only an 8-pin connector and a 450 W PSU

GIGABYTE GeForce RTX 3050 Eagle OC 8GB

This graphics card uses the NVIDIA Ampere architecture with 2560 CUDA cores and 8GB of GDDR6 memory on a 128-bit interface. It connects via PCI Express 4.0 and delivers a core clock of 1792 MHz with an effective memory clock of 14000 MHz. The WINDFORCE 2X cooling system uses two 90mm alternate spinning fans and a protective back plate. It requires an 8-pin power connector and a 450W power supply.

Entry 1080p gaming and multi-monitor productivity

The four display outputs (two HDMI 2.1 and two DisplayPort 1.4a) support up to four monitors at a maximum resolution of 7680 x 4320. The 130W thermal design and dual-slot, 213mm length fit most ATX cases. Buyers needing higher frame rates in modern titles at 1440p or ray-traced workloads should consider a card with more memory bandwidth and compute resources.

128-bit memory interface decides 1080p fit

The 128-bit bus paired with 8GB GDDR6 defines the card's effective bandwidth for texture-heavy scenes. If your workload stays at 1080p with moderate settings, this width is adequate; if you target 1440p or high-refresh competitive play, the narrower bus becomes the limiting factor.

أبرز المميزات

  • Ampere architecture drives real-time ray tracing with 2560 CUDA cores
  • 8 GB GDDR6 memory at 14000 MHz effective clock on a 128-bit bus
  • WINDFORCE 2X cooler uses alternate-spinning 90 mm fans and a protective back plate
  • PCIe 4.0 interface with HDMI 2.1 and DisplayPort 1.4a for 7680 x 4320 output
  • 130 W TDP needs only an 8-pin connector and a 450 W PSU

المواصفات

BrandGIGABYTE
SeriesEagle OC
ModelGV-N3050EAGLE OC-8GD
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 30 Series
GPUGeForce RTX 3050
ArchitectureAmpere
Core Clock1792 MHz
CUDA Cores2560
Effective Memory Clock14000 MHz
Memory Size8GB
Memory Interface128-Bit
Memory TypeGDDR6
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI2 x HDMI 2.1
DisplayPort2 x DisplayPort 1.4a
Max Resolution7680 x 4320
CoolerWINDFORCE 2X
Thermal Design Power130W
Recommended PSU Wattage450W
Power Connector8-Pin
Form FactorATX
Max GPU Length213 mm
Card Dimensions (L x H)8.39" x 4.72"
Slot Width2 Slots
وزن الشحنة0.87 kg
أبعاد الطرد337 × 236 × 57 mm

أسئلة حول هذا المنتج

Will the 213 mm length and 2-slot width fit in my ATX case?

The card measures 213 mm long and occupies two expansion slots, so any ATX chassis with at least that much clearance will accommodate it.

What is the correct way to seat the PCI Express 4.0 interface and attach the 8-Pin power connector?

Align the gold fingers with the motherboard slot, press evenly until the retention latch clicks, then plug the 8-Pin cable firmly until its latch engages — skipping the power cable is the common error.

How often should I clean the WINDFORCE 2X fans and 90mm blades to maintain airflow?

Use compressed air every six to twelve months to remove dust from the two 90mm fans and heatsink fins; the protective back plate can be wiped at the same time.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.