GUDGA
GUDGA GS-4TB 2.5" 4TB SATA internal SSD
A 2.5" SATA internal SSD with 4TB capacity, 3D TLC NAND, up to 550MB/s read and 500MB/s write speeds, and 2400TB endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity4TB
- Memory Components3D TLC
- InterfaceSATA III
Style 2.5"
- SATAIII
- 2.5"
- Large 4 TB capacity stores extensive media libraries and backups
- SATA III 6 Gbps interface delivers up to 550 MB/s sequential reads
- 3D TLC NAND flash rated for 2400 TBW provides long write endurance
- 7 mm slim 2.5" form factor fits most laptops and desktops
- 1,000,000 hour MTBF and 0–70 °C operating range ensure reliable daily use
GS Series 4TB SATA SSD
The GUDGA GS-4TB is a 2.5 inch internal solid-state drive built for consumer desktops and laptops. It uses 3D TLC NAND flash and connects through the SATA III interface. The drive offers 4TB of storage for operating systems, applications and large file libraries.
SATA III 6Gbps interface
This drive communicates over the SATA III protocol with a 6Gbps link speed. Maximum sequential read reaches 550MB/s and maximum sequential write reaches 500MB/s. Endurance is rated at 2400TB written and MTBF at 1000000 hours.
7mm z-height installation
The drive measures 7.00mm in height so it fits standard 2.5 inch bays in most laptops and desktops. No heatsink is included and the unit draws power from the SATA 5V rail. Operating temperature range is 0°C to 70°C.
أبرز المميزات
- Large 4 TB capacity stores extensive media libraries and backups
- SATA III 6 Gbps interface delivers up to 550 MB/s sequential reads
- 3D TLC NAND flash rated for 2400 TBW provides long write endurance
- 7 mm slim 2.5" form factor fits most laptops and desktops
- 1,000,000 hour MTBF and 0–70 °C operating range ensure reliable daily use
المواصفات
| Brand | GUDGA |
|---|---|
| Series | GS Series |
| Model | GS-4TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 4TB |
| Memory Components | 3D TLC |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | 550MB/s |
| Max Sequential Write | 500MB/s |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
إصدارات أخرى من هذا الطراز
5 أخرى من الفئة نفسها
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
GUDGA GS-256 2.5" SATA 256GB internal SSD
- Internal Solid Stat…
- Consumer
GUDGA GS-512 512GB 2.5" SATA internal SSD
- Internal Solid Stat…
- Consumer
GUDGA GS-1TB 2.5" SATA internal SSD 1TB
- Internal Solid Stat…
- Consumer
GUDGA GS-2TB 2.5" SATA internal SSD 2TB
- Internal Solid Stat…
- Consumer
أسئلة حول هذا المنتج
How do the 550MB/s read and 500MB/s write speeds translate to everyday use?
The drive delivers up to 550MB/s sequential read and 500MB/s sequential write over SATA III, so operating-system boots, application launches and large file copies run at the interface limit.
What does the SATA III 6Gbps interface cap in practice?
SATA III tops out at 6Gbps, so the drive cannot exceed roughly 550MB/s read and 500MB/s write regardless of the NAND speed.
Will the 7.00mm height fit my laptop drive bay?
The drive measures 7.00mm high, 69.85mm wide and 100.00mm deep, matching the standard 2.5-inch 7mm bay used in most laptops and desktops.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM








