نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with gold edge connectors and silver mounting brackets

HPE

HPE 871242B21 2SFF NVMe Backplane Kit for DL360 Gen10 Server

SKU CH-C5GJ-RJNHH MPN 871242B21

A 2SFF NVMe backplane kit enabling two small-form-factor NVMe drives in an HPE ProLiant DL360 Gen10 server

  • TypeOffice Products
  • Enables NVMe storage for DL360 Gen10
  • Supports two small-form-factor NVMe drives
  • Direct-fit kit for HPE ProLiant DL360 Gen10
  • Simplifies high-speed storage integration
  • Genuine HPE part number 871242B21

HPE DL360 Gen10 2SFF NVMe Kit

This kit adds two small-form-factor NVMe drive bays to an HPE ProLiant DL360 Gen10 server. It is built for administrators who need local high-speed storage in a 1U rack chassis. The backplane connects directly to the server board to support non-volatile memory express devices. Installation uses the existing drive cage space without extra cabling.

For DL360 Gen10 NVMe upgrades

Suitable for IT teams expanding flash capacity on a supported DL360 Gen10 platform. Not for owners of other ProLiant models or earlier generations that lack the required backplane connector. Builders needing more than two NVMe slots should evaluate alternative configurations. Customers without a compatible server cannot use this kit.

Two-bay NVMe backplane interface

The single specification that decides fit is the two-bay NVMe backplane interface designed for the DL360 Gen10. It determines whether the server chassis accepts the kit and whether the drives communicate at PCIe speeds. Verify the server model and generation before ordering.

أبرز المميزات

  • Enables NVMe storage for DL360 Gen10
  • Supports two small-form-factor NVMe drives
  • Direct-fit kit for HPE ProLiant DL360 Gen10
  • Simplifies high-speed storage integration
  • Genuine HPE part number 871242B21

المواصفات

BrandHPE - SERVER OPTIONS
TypeOffice Products
وزن الشحنة1.36 kg
أبعاد الطرد272 × 208 × 104 mm

أسئلة حول هذا المنتج

Should I choose the 2SFF NVMe backplane kit or a different drive cage for my DL360 Gen10?

The 871242B21 kit adds two small form factor NVMe slots to the front of a ProLiant DL360 Gen10, so select it when you need direct-attached NVMe storage in those bays.

What does the 2SFF NVMe designation mean once the kit is installed in the server?

It provides two front-accessible small form factor bays wired for NVMe drives, letting the operating system see each drive as a low-latency NVMe namespace without a RAID controller in between.

Which interface standard does the backplane use and what does it limit in practice?

The backplane uses the NVMe protocol over PCIe lanes from the CPU, so throughput and queue depth are capped by the processor's PCIe generation and the number of lanes allocated to the two bays.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.