HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
HPE
A 2.5-inch SATA internal SSD with 240GB capacity designed for enterprise workloads
The HPE P40496B21 is a 240GB 2.5" SATA internal SSD built for enterprise environments. It targets workloads such as big data analytics, cloud computing, database applications and data warehousing where consistent throughput matters. The drive connects through a standard SATA III interface at 6 Gb/s. It is designed to fit into existing server and storage arrays without special adapters.
HPE specifies higher IOPs to enhance data-centre performance under continuous demand. Full data-path error detection protects accuracy during long-running read and write sequences. The firmware is tuned for read-intensive and mixed-use enterprise workloads rather than short consumer bursts. This helps maintain steady transaction rates for databases and active archives over extended periods.
The 2.5" form factor allows standard drive-bay airflow in rack servers. Solid-state construction eliminates moving parts, so acoustic output is negligible compared with mechanical drives. Power draw scales with the SATA interface limits and the stated enterprise optimisation for reducing operating costs. No active cooling beyond normal chassis ventilation is required.
| Brand | HPE |
|---|---|
| Device Type | Internal / External Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | 2.5" |
| Capacity | 240GB |
| Interface | SATA III |
| Protocol | SATA |
| وزن الشحنة | 1.36 kg |
| أبعاد الطرد | 215 × 190 × 135 mm |
The drive uses a 2.5" form factor. Most 3.5" bays need an adapter bracket or caddy to secure a 2.5" unit properly.
Yes, SATA III is backward compatible with SATA II and SATA I ports. The drive will operate at the controller's maximum supported speed.
HPE positions this drive for read-intensive and mixed-use applications such as databases, analytics, cloud workloads and active archiving.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟