نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

IBM

IBM ST3300657SS 300GB 15000RPM 3.5" SAS internal hard drive

SKU CH-XA7E-Q8QTC

A 300 GB 15000 RPM SAS drive with a 3.5 inch form factor and an included caddy tray

  • 300GB capacity stores large server workloads
  • 15000RPM spindle speed accelerates data access
  • SAS 6Gbps interface delivers high-throughput connectivity
  • 5-inch form factor fits standard drive bays
  • Includes IBM System X caddy for direct installation

Product Identity

The IBM ST3300657SS is a new 300GB 3.5-inch internal hard drive spinning at 15000RPM with a SAS 6Gbps interface. It includes an IBM System X caddy and carries part numbers 49Y6093, 49Y6092 and 49Y6096.

Fit and Exclusions

This drive suits servers and storage arrays that accept a 3.5-inch SAS disk running at 15000RPM. Buyers who need a larger capacity than 300GB or who require a different physical interface should look at something else.

Deciding Specification

The single specification that decides fit is the SAS 6Gbps interface combined with a 15000RPM rotational speed; the system backplane and controller must support this exact interface and speed for the drive to function.

أبرز المميزات

  • 300GB capacity stores large server workloads
  • 15000RPM spindle speed accelerates data access
  • SAS 6Gbps interface delivers high-throughput connectivity
  • 5-inch form factor fits standard drive bays
  • Includes IBM System X caddy for direct installation

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Does the ST3300657SS need a SAS controller that supports 6Gbps?

Yes, the drive uses a 3.5" SAS 6Gbps interface, so the host controller or backplane must support SAS at 6Gbps for full performance.

Can I use the included IBM SYSTEM X caddy in a non-IBM server chassis?

The caddy fits IBM SYSTEM X bays; other chassis may need a different tray or adapter to secure the 3.5" drive.

How do I verify the drive is running at 15000RPM after installation?

Check the drive’s reported rotational speed in the RAID controller BIOS, operating system disk utility, or SMART data — it should show 15000RPM.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.