نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black metal drive tray with tool-less latch for 2.5 inch SAS SATA drives

ICY DOCK

ICY DOCK ExpressTray MB324TP-B 2.5" SAS SATA Drive Tray

SKU CH-1879-2MA3E

Spare hot-swap tray fits the MB324SP-B cage for tool-less 2.5-inch SAS SATA drive installation

  • TypeRack
  • Tool-less drive installation speeds up swaps
  • Compatible with ExpressCage MB324SP-B 4-bay hot-swap cage
  • Fits 2.5" SAS and SATA drives in a 5.25" bay
  • Rack-mountable server system design
  • New condition, first listed by manufacturer in 2024

Compatible 2.5" SAS SATA Drive Tray

The ICY DOCK ExpressTray MB324TP-B is a spare or replacement caddy designed for the ExpressCage MB324SP-B hot-swap cage. It accepts a single 2.5-inch SAS or SATA hard drive or solid-state drive and installs without tools. The tray fits the 5.25-inch front bay form factor used by the host cage. It is sold new and ready for immediate deployment in compatible server chassis.

Suits admins expanding

This tray is intended for system builders and IT staff who already operate the four-bay ExpressCage and need additional or spare carriers. It is not for buyers who lack the ExpressCage MB324SP-B, require support for interfaces other than SAS or SATA, or need a different drive form factor such as 3.5-inch. Without the host cage the tray cannot function as a hot-swap module.

Tool-less drive installation design

The defining specification is the tool-free mechanism that secures a 2.5-inch SAS or SATA drive inside the tray. This feature determines whether the part matches the maintenance workflow of the ExpressCage MB324SP-B. If your cage uses a different locking method or bay spacing, this tray will not be compatible.

أبرز المميزات

  • Tool-less drive installation speeds up swaps
  • Compatible with ExpressCage MB324SP-B 4-bay hot-swap cage
  • Fits 2.5" SAS and SATA drives in a 5.25" bay
  • Rack-mountable server system design
  • New condition, first listed by manufacturer in 2024

المواصفات

TypeRack

أسئلة حول هذا المنتج

Will the 2.5" ExpressTray MB324TP-B fit in a standard 5.25" front bay?

Yes, the tray is built for the ExpressCage MB324SP-B which mounts in a single 5.25" bay and holds up to four 2.5" SAS or SATA drives.

How do I install a drive without tools, and what step is often missed?

Slide the 2.5" drive into the tray until the connector seats, then close the latch; the step often missed is pressing the latch fully until it clicks to lock the drive for hot-swap operation.

What part would need replacement if the hot-swap latch stops locking after heavy use?

The tool-less latch mechanism on the ExpressTray MB324TP-B itself would need replacement; the cage and backplane remain unaffected.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.