BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
iStarUSA Inc.
Adds two USB 3.0 ports at 5.0 Gbps via a PCI slot, supporting Windows XP through 7 on 32-bit and 64-bit systems
The iStarUSA SAGE-PCIE-2U3 adds two USB ports and a 1394 connection to a desktop through a standard PCI slot. It delivers up to 5.0 Gbps transfer rate and remains compliant with USB 3.0 and xHCI specifications. The card supports USB 3.0, 2.0 and 1.1 devices for broad peripheral compatibility. It also supports Serial ATA II Port Multiplier 1.0 specification revision 1.1.
This card replaces a system that relies on slower USB 2.0 ports or lacks a 1394 interface entirely. The jump is worth it when external storage or legacy devices need the 5.0 Gbps bandwidth or the 1394 connection. It brings modern host-controller compliance to older platforms that still run Windows XP, Vista, 2003 Server, 2008 Server or Win7 in 32-bit and 64-bit editions.
The PCI interface caps real-world throughput below the 5.0 Gbps USB 3.0 ceiling, so sustained transfers will not reach the nominal rate. Driver support ends with the listed Windows versions, leaving newer operating systems without official support. Buyers who need more than two USB ports or require current OS drivers should consider a different solution.
| Brand | iStarUSA |
|---|---|
| Model | SAGE-PCIE-2U3 |
| Type | PCI to 1394 / USB Card |
| External USB Ports | 2x USB Ports |
| Data Transfer Rate | Up to 5.0 Gbps |
| Operating Systems Supported | Windows XP/Vista/2003 Server/2008 Server /Win7 - 32bits Windows XP/Vista/2003 Server/2008 Server - 64bits |
| Features | Fully compliant with USB 3.0 and xHCI (eXtensible Host Controller Interface) specifications Supports USB 3.0, 2.0 and 1.1 Supports Serial ATA II Port Multiplier 1.0 Specifications revision 1.1. |
| وزن الشحنة | 0.07 kg |
| أبعاد الطرد | 178 × 122 × 33 mm |
The SAGE-PCIE-2U3 is a PCI to 1394/USB card designed for a conventional PCI expansion slot, not PCI Express.
After seating the card, install the xHCI driver for USB 3.0 before connecting devices; Windows 7 64-bit does not load it automatically.
Ensure the host system supplies stable 5 V power to the PCI slot and avoid daisy-chaining unpowered hubs that can throttle the 5.0 Gbps rate.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟