نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Jansicotek

Jansicotek USB 3.0 to 2.5-Inch SATA Adapter Cable 2-Pack

SKU CH-QQ4R-DFYA0

Connect a 2.5" SATA SSD or HDD via USB 3.0 for backups, cloning or extra storage with UASP support

  • Changer TypeUSB to SATA
  • Connect 2.5" SATA drives via USB 3.0 for easy external storage
  • Achieve up to 70% faster transfers with UASP support on compatible systems
  • Portable cable design requires no external power for 2.5" SSDs or HDDs
  • Plug-and-play operation lets you swap drives instantly without driver installation
  • Two-pack provides spare cables for simultaneous drive access or backup needs

Two-Pack USB 3.0 to 2.5-Inch SATA Adapter

This two-pack provides two USB 3.0 to SATA adapter cables for connecting 2.5-inch SATA hard drives or solid state drives to a computer. Each cable enables quick external access via a standard USB port. The adapters support UASP for faster transfer speeds on compatible systems. They require no external power and operate on a plug-and-play basis without driver installation.

Suits Laptop Upgrades and Data Recovery

These adapters suit users upgrading laptop storage by adding an external SSD or retrieving data from an old drive. They are ideal for backups, disk imaging and drive cloning tasks. The portable design fits in a laptop bag for mobile use. Builders needing to connect 3.5-inch drives or requiring an enclosure for permanent installation should look elsewhere.

USB 3.0 Interface with UASP Support

The decisive specification is the USB 3.0 interface with UASP support, delivering 5Gbps bandwidth and up to 70% faster transfers than conventional USB 3.0 on UASP-enabled hosts. This determines whether the adapter meets the performance needs for moving large data sets quickly. Without a UASP-capable host the speed advantage is not realised.

أبرز المميزات

  • Connect 2.5" SATA drives via USB 3.0 for easy external storage
  • Achieve up to 70% faster transfers with UASP support on compatible systems
  • Portable cable design requires no external power for 2.5" SSDs or HDDs
  • Plug-and-play operation lets you swap drives instantly without driver installation
  • Two-pack provides spare cables for simultaneous drive access or backup needs

المواصفات

Changer TypeUSB to SATA
ModelFor 2.5in SATA drives

أسئلة حول هذا المنتج

Does the adapter cable draw extra power or generate noticeable heat when a 2.5" SSD runs all day?

No external power is required for 2.5" drives, so the cable draws only bus power and stays cool during continuous operation.

What must my computer already have to use this adapter with a 2.5" SATA drive?

An available USB 3.0 port; the cable is plug-and-play and needs no drivers or additional hardware.

Will this cable work with an older laptop that only has USB 2.0 ports?

Yes, it is backward compatible with USB 2.0, though transfer speeds will be limited to the older port's maximum.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.