EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
KHACHIMO
Compact 20-pin 60 W ATX power supply with 80 PLUS Gold efficiency, Modern Standby support, zero-RPM fan mode and resonant LLC topology for clean, quiet power
The KHACHIMO KSD-060F4 is a 1U form-factor power supply delivering 60 watts through a 20-pin ATX connector. It targets small-chassis builds and replacement scenarios where a standard ATX unit will not fit. Modern Standby compatibility enables rapid wake-from-sleep and improved low-load efficiency. An 80 PLUS Gold rating confirms high efficiency across the operating range.
This unit fits 1U enclosures and systems requiring a 20-pin ATX mains connector with modest 60W output. The Zero RPM fan mode stops the fan at low and medium loads for near-silent operation. Builders needing higher wattage for discrete graphics or multi-drive arrays should look at higher-capacity power supplies. Systems requiring a 24-pin main connector cannot use this unit without an adapter.
The single specification that determines fit is the 20-pin ATX main power connector. Modern motherboards typically use a 24-pin socket, so this supply only suits boards designed for the older 20-pin standard or installations where an adapter is acceptable. Resonant LLC topology with DC-to-DC conversion provides clean power and reduces coil whine. Verify the motherboard connector before purchase.
| Type | ATX |
|---|
The 60 W rating is the maximum continuous power the unit can deliver across its rails; a build that draws more than this under load will shut down or become unstable.
The 20-pin ATX connector fits motherboards with a 20-pin main power socket; it cannot supply the extra four pins found on 24-pin boards, so those boards will not receive the full power specification.
The 1U height requires a case or rack with a single rack-unit slot, so the chassis must accept a power supply no taller than the standard 1U profile.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟