KingSpec P3-1TB 1TB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
KingSpec
A 2.5" SATA III internal SSD with 3D NAND flash delivers up to 520 MB/s reads and 500 MB/s writes for faster boots and file transfers
Options P3-4TB
The KingSpec P3-4TB is a 2.5-inch internal solid-state drive built for consumer laptops and desktops. It uses a SATA III interface and 3D NAND flash to deliver up to 520 MBps sequential read and 500 MBps sequential write speeds. Random performance reaches 65000 IOPS read and 70000 IOPS write for responsive everyday workloads.
With no moving parts the drive runs silently and generates minimal heat during typical operation. Idle power consumption is rated at .41W helping to extend battery life in portable systems. The SATA 6Gbps link operates without active cooling so acoustics remain at zero decibels under normal desktop or laptop use.
The standard 2.5-inch SATA form factor fits most drive bays and caddies in desktops laptops and NAS units. It works with older SATA II controllers at reduced bandwidth and supports NCQ TRIM S.M.A.R.T. wear leveling garbage collection and over-provisioning for sustained performance. A 1920 TBW endurance rating and 1000000 hour MTBF provide long-term reliability for high-capacity storage upgrades.
| Brand | KingSpec |
|---|---|
| Series | P3 Series |
| Model | P3-4TB |
| Part Number | P3-4TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 520 MBps |
| Max Sequential Write | Up to 500 MBps |
| 4KB Random Read | Up to 65,000 IOPS |
| 4KB Random Write | Up to 70,000 IOPS |
| Terabytes Written (TBW) | 1920TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.41W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +75°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7mm |
| Width | 70.0mm |
| Depth | 100.4mm |
| Weight | 50g |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Mount the drive in a 2.5" bay, connect the SATA data cable to a SATA III port and the SATA power cable from the PSU, then enable AHCI in BIOS so the drive can use NCQ and TRIM.
The drive handles wear leveling, garbage collection, over-provisioning and TRIM automatically; no user maintenance is required, and the 1920 TBW rating indicates when the NAND may reach its write endurance limit.
The SATA III interface caps sequential write at 500 MBps, so the bus bandwidth becomes the bottleneck before the NAND or controller reaches its own limits.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟