Kingston Technology Corp. KSM32SES8/8HD 8GB DDR4-3200 CL22 ECC SO-DIMM server RAM
- 8GB
- 260-Pin DDR4 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
16 GB DDR4 SO-DIMM with ECC, 3200 MHz speed and CL22 latency for servers and notebooks
Rank 1Rx8
Option Micron
This 16 GB DDR4 module adds error-correcting memory to compatible laptops and compact servers. Unbuffered operation and a single 1Rx8 rank keep latency low while the 260-pin form factor fits standard SO-DIMM slots. A 1.20 V rating matches mainstream platform requirements.
The integrated heat spreader helps disperse warmth during typical workloads without active cooling. At 1.20 V the module draws modest power, contributing to quieter operation in fanless or low-airflow chassis. Standard JEDEC timings avoid extra voltage overhead.
CL22 timings at 3200 MHz remain stable through extended compute sessions thanks to the spreader and conservative voltage. ECC circuitry continuously corrects single-bit errors, protecting data integrity during long-running database or virtualisation tasks. Unbuffered signalling keeps command paths short for consistent throughput.
| Brand | Kingston |
|---|---|
| Model | KSM32SES8/16MF |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Timing | 22-22-22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | Yes |
| وزن الشحنة | 0.05 kg |
| أبعاد الطرد | 127 × 76 × 8 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Align the notch on the module with the slot key, insert at an angle, then press down until both side clips click. The frequent error is stopping when resistance is first felt instead of pushing until the clips engage fully.
No scheduled maintenance is required. If a correctable error count rises or the system logs uncorrectable ECC events, replace the module; otherwise it runs for the life of the platform.
The JEDEC 1.20V operating voltage caps frequency scaling, so the module stays at 3200MHz CL22; thermal throttling is not triggered because the heat spreader keeps temperatures within spec.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟