نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 2.5 inch U.2 enterprise SSD with label showing 7.68TB capacity

Kingston Technology Corp.

Kingston Technology Corp. SEDC3000ME/7T6 7.68TB enterprise SSD

SKU CH-1GVH-CAC3P MPN SEDC3000ME/7T6

A 7.68 TB enterprise NVMe drive with PCIe 5.0 x4 interface delivering 14000 MBps read and 10000 MBps write speeds, 1 DWPD endurance and AES 256-bit encryption

  • Form Factor2.5" U.2
  • Capacity7.68TB
  • Memory Components3D eTLC
  • InterfacePCI-Express 5.0 x4
  • Max Sequential ReadUp to 14000 MBps
  • Max Sequential WriteUp to 10000 MBps

Options 7.68TB

  • Delivers up to 14000 MBps sequential read speed for demanding workloads
  • Sustains up to 10000 MBps sequential write throughput for heavy write tasks
  • Handles up to 2800000 random read IOPS for low-latency data access
  • Protects data with AES 256-bit encryption and TCG Opal 2.0 compliance
  • Rated for 14016 TB written endurance over the drive lifetime

Enterprise SSD for data-centre workloads

The Kingston SEDC3000ME/7T6 is a 2.5" U.2 enterprise SSD built for server and data-centre environments. It targets applications that demand sustained throughput and hardware-based encryption. The drive suits AI, HPC, cloud services and edge computing deployments. Buyers needing a consumer form factor or lower endurance should look elsewhere.

PCI-Express 5.0 x4 interface

The drive connects through a PCI-Express 5.0 x4 link, delivering up to 14000 MBps sequential read and 10000 MBps sequential write. Random performance reaches 2800000 IOPS read and 500000 IOPS write with read latency below 10 µs and write latency below 70 µs. This interface is the single specification that decides compatibility.

Fits 2.5" U.2 bays with PLP and AES 256-bit

The 2.5" U.2 form factor slots into standard server backplanes and draws up to 24W during write operations. On-board power loss protection safeguards in-flight data while TCG Opal 2.0 and AES 256-bit encryption secure data at rest. No extra cabling or software layer is required for these features.

أبرز المميزات

  • Delivers up to 14000 MBps sequential read speed for demanding workloads
  • Sustains up to 10000 MBps sequential write throughput for heavy write tasks
  • Handles up to 2800000 random read IOPS for low-latency data access
  • Protects data with AES 256-bit encryption and TCG Opal 2.0 compliance
  • Rated for 14016 TB written endurance over the drive lifetime

المواصفات

BrandKingston
ModelSEDC3000ME/7T6
Form Factor2.5" U.2
Capacity7.68TB
Memory Components3D eTLC
InterfacePCI-Express 5.0 x4
Max Sequential ReadUp to 14000 MBps
Max Sequential WriteUp to 10000 MBps
4KB Random ReadUp to 2,800,000 IOPS
4KB Random WriteUp to 500,000 IOPS
Read Latency<10 µs
Write Latency< 70 µs
Endurance1 DWPD
Terabytes Written (TBW)14016TB
MTBF2,000,000 hours
SecurityTCG Opal 2.0, AES 256-bit encryption
Power Consumption (Idle)8W
Power Consumption (Active)Max Read: 8.2W
Max Write: 24W
Operating Temperature0°C ~ +70°C
Max Vibration Resistance10G Peak (10-1000Hz)
Height14.8mm
Width100.5mm
Depth69.8mm
Weight151.3g
وزن الشحنة0.18 kg
أبعاد الطرد184 × 130 × 15 mm

إصدارات أخرى من هذا الطراز

2 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How does the 14000 MBps sequential read speed translate in a server workload?

The 14000 MBps read and 10000 MBps write figures are maximum sequential throughput; real-world sustained speeds depend on queue depth, block size and controller firmware tuning.

What does the PCI-Express 5.0 x4 interface limit in practice?

The PCIe 5.0 x4 link sets the electrical ceiling for NVMe command transport; the drive reaches its rated 14000 MBps read and 10000 MBps write within that link.

Will the 2.5 inch U.2 14.8 mm height fit my hot-swap bay?

The drive measures 100.5 mm wide, 69.8 mm deep and 14.8 mm high, matching the standard 2.5 inch U.2 form factor for hot-swap carriers.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.