HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
A 7.68 TB U.2 enterprise SSD delivering 14000 MB/s reads and 10000 MB/s writes with 1 DWPD endurance and AES 256-bit encryption
The Kingston SEDC3000ME/7T6 is a 2.5-inch U.2 solid-state drive built for server and storage arrays. It uses 3D eTLC flash and a PCI-Express 5.0 x4 interface to deliver high throughput in a standard enterprise form factor.
This drive fits databases, content repositories and analytics platforms that value sustained sequential speed and 1 DWPD endurance. It is not for write-intensive logging or caching tiers that exceed the rated endurance, nor for systems lacking a U.2 backplane or PCIe 5.0 support.
The drive requires a U.2 port wired for four lanes of PCIe 5.0 to reach the rated 14000 MBps read and 10000 MBps write performance. Without that link the drive will negotiate a slower speed and may not meet the throughput target.
| Brand | Kingston |
|---|---|
| Model | SEDC3000ME/7T6 |
| Form Factor | 2.5" U.2 |
| Capacity | 7.68TB |
| Memory Components | 3D eTLC |
| Interface | PCI-Express 5.0 x4 |
| Max Sequential Read | Up to 14000 MBps |
| Max Sequential Write | Up to 10000 MBps |
| 4KB Random Read | Up to 2,800,000 IOPS |
| 4KB Random Write | Up to 500,000 IOPS |
| Read Latency | <10 µs |
| Write Latency | < 70 µs |
| Endurance | 1 DWPD |
| Terabytes Written (TBW) | 14016TB |
| MTBF | 2,000,000 hours |
| Security | TCG Opal 2.0, AES 256-bit encryption |
| Power Consumption (Idle) | 8W |
| Power Consumption (Active) | Max Read: 8.2W Max Write: 24W |
| Operating Temperature | 0°C ~ +70°C |
| Max Vibration Resistance | 10G Peak (10-1000Hz) |
| Height | 14.8mm |
| Width | 100.5mm |
| Depth | 69.8mm |
| Weight | 151.3g |
The drive is backward compatible with PCIe 4.0 x4 slots, though sequential reads will be limited to the PCIe 4.0 ceiling rather than the rated 14000 MBps.
Use a tool such as fio or CrystalDiskMark with a 4 KB random read workload at high queue depth; sustained results approaching 2800000 IOPS indicate the drive is operating as specified.
The drive ships as the bare 2.5" U.2 module only; U.2 cables, drive carriers and any required heatsinks are sold separately.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟