نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
LORDWORLD 5 inch 800x480 resistive touch LCD monitor in bi-color case

LORDWORLD

LORDWORLD 5 inch 800x480 Resistive Touch LCD Monitor

SKU CH-09AG-8J71J

A 5-inch resistive touch display with 800x480 resolution, HDMI input and driver-free support for Raspberry Pi, Banana Pi, BeagleBone Black and Windows 10/8.1/8/7 systems

  • Sharp 800x480 hardware resolution for clear visuals
  • Resistive touch control enables precise single-touch input
  • Backlight can be turned off to lower power consumption
  • Works with Raspberry Pi, Banana Pi and BeagleBone Black
  • Driver-free operation on Windows 10, 8.1, 8, 7 and major Pi OSes

5 inch 800x480 Resistive Touch LCD

The LORDWORLD 5 inch 800x480 Resistive Touch LCD Monitor is a compact display module designed for embedded projects and desktop use. It connects to Raspberry Pi, Banana Pi, BeagleBone Black and standard PCs via HDMI. The resistive panel provides single-touch input without driver installation on supported operating systems. It suits makers building portable interfaces or secondary screens.

Thermals noise and power draw

The backlight can be turned off to lower power consumption during idle periods. With no active cooling components listed, the unit runs silently in normal operation. Heat output remains low when displaying static content at the native 800x480 resolution. Power draw scales with backlight brightness and touch activity.

Sustained load behaviour

Under continuous operation the resistive layer maintains single-touch responsiveness across Windows 10, 8.1, 8, 7 and Raspberry Pi distributions including Raspbian, Ubuntu, Kali, Retropie and WIN10 IOT. Driver-free support avoids software overhead during long sessions. The display is not suited for multi-touch gestures or high-refresh applications. Buyers needing capacitive multi-touch or higher pixel density should consider other options.

أبرز المميزات

  • Sharp 800x480 hardware resolution for clear visuals
  • Resistive touch control enables precise single-touch input
  • Backlight can be turned off to lower power consumption
  • Works with Raspberry Pi, Banana Pi and BeagleBone Black
  • Driver-free operation on Windows 10, 8.1, 8, 7 and major Pi OSes

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

How do I connect the HDMI and USB cables so the resistive touch works with a Raspberry Pi?

Plug the HDMI lead into the Pi's HDMI port and the USB lead into any USB port; the touch layer is recognised automatically under Raspbian, Ubuntu, Kali, Retropie or WIN10 IOT without extra drivers.

What part is most likely to wear out first on the resistive touch panel?

The flexible top membrane of the resistive layer can lose sensitivity after repeated pressure; keeping the surface clean and using a stylus instead of fingernails extends its life.

At what point does the backlight become the limiting factor during continuous operation?

The backlight can be switched off to cut power draw, but while it stays on its brightness will gradually dim over long periods before the LCD panel itself shows any degradation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.