OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
LORDWORLD
An 8 MP infrared night-vision camera module with a 77° field of view, f/2.0 aperture and 3280 × 2464 resolution, designed for the NVIDIA Jetson Nano Developer Kit
This camera module is built for the NVIDIA Jetson Nano Developer Kit and delivers 8 megapixels at 3280 by 2464 resolution. Makers and developers working on edge AI prototypes such as face recognition or license plate detection will find the sensor a direct fit. The 77 degree diagonal field of view suits stationary monitoring tasks. It is not intended for buyers who need a wider angle or a different host platform.
The IMX219 sensor maintains its specified 3280 by 2464 output during continuous capture and keeps distortion below one percent across the frame. When paired with external infrared LEDs the module enables night vision for low light projects such as road mark detection. The fixed aperture of 2.0 and 2.96 millimetre focal length remain constant under prolonged use. Builders who require variable aperture or optical zoom cannot meet that need here.
The board measures 25 by 24 millimetres and provides four screw holes on a 6.5 millimetre pitch for secure attachment. A 3.3 volt power output and dedicated pads for infrared or fill flash LEDs simplify wiring on the Jetson Nano CSI connector. The compact 6.5 by 6.5 millimetre lens housing leaves minimal clearance for additional optics. Users who need a different mounting pattern or a larger sensor format will have to look elsewhere.
| Brand | LORDWORLD |
|---|
The board provides a 3.3 V output for attached infrared LEDs and draws minimal current from the Jetson Nano CSI connector, so heat and noise stay negligible during continuous capture.
A Jetson Nano Developer Kit with a free MIPI CSI-2 lane and the 15-pin flex cable that matches the module’s 6.5 mm × 6.5 mm footprint.
Yes, the four mounting holes and 25 mm × 24 mm outline match the standard Jetson Nano camera footprint, so the module bolts on without adapters.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟