نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Credit-card-sized green PCB with 40-pin GPIO header, HDMI, USB, RJ45, CSI, DSI, fan header, microSD and M.2 slots

LORDWORLD

LORDWORLD Mini Base Board (A) Lite for CM4 with 40PIN GPIO development board

SKU CH-GABW-ZZRKQ

A compact carrier board that adds standard CM4 socket, colour-coded 40-pin GPIO, CSI, DSI, fan, HDMI, USB, Gigabit Ethernet, microSD and M.2 slots for Compute Module 4 evaluation or integration

  • Compact credit-card form factor fits tight enclosures
  • Standard CM4 socket accepts Lite and eMMC modules directly
  • Colour-coded 40-pin GPIO header simplifies wiring and debugging
  • Onboard CSI, DSI, FAN, HDMI, USB, Gigabit Ethernet, Micro SD and M.2 connectors
  • Ready for CM4 evaluation or integration into end products

Compact Carrier for Compute Module 4

The LORDWORLD Mini Base Board (A) Lite provides a credit-card-sized carrier for a Raspberry Pi Compute Module 4. It accepts both Lite and eMMC variants through a standard CM4 socket. A colour-coded 40-pin GPIO header matches the Raspberry Pi pinout for straightforward prototyping. Builders who need more than one carrier board for a cluster should look elsewhere.

Connectivity Limits of the Onboard Interfaces

The board breaks out CSI, DSI, FAN, HDMI, USB, Gigabit Ethernet, a Micro SD slot and an M.2 slot from the module. Each interface operates at the speeds defined by the Compute Module 4 itself; the carrier adds no additional bandwidth or protocol conversion. Users who require multiple simultaneous high-speed cameras or additional PCIe lanes beyond what the module supplies cannot be accommodated by this carrier.

Standard CM4 Socket Determines Module Compatibility

The single specification that decides fit is the standard CM4 socket, which accepts any Compute Module 4 Lite or eMMC series module. No other form factor or pinout will seat in this connector. Buyers who already own a Compute Module 1, 3 or 3+ will find those modules physically and electrically incompatible with this board.

أبرز المميزات

  • Compact credit-card form factor fits tight enclosures
  • Standard CM4 socket accepts Lite and eMMC modules directly
  • Colour-coded 40-pin GPIO header simplifies wiring and debugging
  • Onboard CSI, DSI, FAN, HDMI, USB, Gigabit Ethernet, Micro SD and M.2 connectors
  • Ready for CM4 evaluation or integration into end products

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

Which Compute Module 4 variants does this base board support?

The board accepts both Compute Module 4 Lite and eMMC series modules via the standard CM4 socket.

What does the 40-pin GPIO header provide for a CM4 project?

The colour-coded 40-pin header exposes the full Raspberry Pi GPIO layout for direct HAT and sensor connections.

What network speed does the onboard RJ45 port deliver?

The RJ45 connector provides Gigabit Ethernet for the Compute Module 4.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.