نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small green circuit board with USB-C connector and castellated edges

LORDWORLD

LORDWORLD RP2040-Zero development board USB-C

SKU CH-BPW0-YJA68

Pico-compatible development board with dual-core Arm Cortex M0+ at 133 MHz, 264 KB SRAM, 2 MB flash, USB-C and castellated edges for direct soldering

  • Dual-core Arm Cortex M0+ up to 133 MHz for responsive real-time tasks
  • 264 KB SRAM plus 2 MB Flash stores code and data on-board
  • USB-C connector simplifies power and data with modern cables
  • Castellated edges enable direct soldering to carrier boards for compact designs
  • Drag-and-drop mass-storage programming loads firmware without extra tools

Development board for embedded projects

The LORDWORLD RP2040-Zero is a compact development board built around the RP2040 microcontroller designed in the United Kingdom. It targets hobbyists, students and engineers who need a low-cost platform for learning, prototyping or deploying small IoT edge applications. The board ships new and ready for immediate use.

Sustained operation with dual-core Cortex-M0+

The dual-core Arm Cortex M0+ processor runs at a flexible clock up to 133 MHz and provides 264KB of SRAM alongside 2MB of on-board Flash memory. This combination handles continuous sensor polling, control loops or communication tasks without thermal throttling. Low-power sleep and dormant modes extend battery life during idle periods.

Check USB and soldering requirements

Verify that your host machine can supply USB 1.1 device or host communication over a USB-C cable. The castellated edges are intended for direct soldering to a carrier board, so confirm your design accepts that mounting method. Drag-and-drop programming works via mass storage over USB without extra tools.

أبرز المميزات

  • Dual-core Arm Cortex M0+ up to 133 MHz for responsive real-time tasks
  • 264 KB SRAM plus 2 MB Flash stores code and data on-board
  • USB-C connector simplifies power and data with modern cables
  • Castellated edges enable direct soldering to carrier boards for compact designs
  • Drag-and-drop mass-storage programming loads firmware without extra tools

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

How much power does the RP2040 chip draw when the board runs continuously at 133 MHz?

The dual-core Cortex M0+ processor includes low-power sleep and dormant modes to reduce consumption during extended operation.

What host computer and cable are required to program the board over USB-C?

Any computer with a USB 1.1 port and a standard USB-C cable will enumerate the board as a mass-storage device for drag-and-drop programming.

Can I solder this castellated module directly onto a carrier board designed for an older Pico form factor?

The castellated edges allow direct soldering to a custom carrier, but pin spacing and dimensions must match your existing carrier layout.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.