نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with gold edge connector and small antenna socket

LORDWORLD

LORDWORLD SX1262 LoRa Node Module for Raspberry Pi Pico Series Boards

SKU CH-ABQM-4471M

A LoRa node module for Raspberry Pi Pico boards with SX1262 chip, temperature-compensated oscillator, recharge controller, up to 22 dBm output and 256-byte packets

  • Stable timing in extreme temperatures with active temperature-compensated crystal oscillator
  • Ultra-long range communication via FSK, GFSK and LoRa modulations with strong block resistance
  • Battery-powered operation through PH1.25 header with built-in recharge controller for Lithium cells
  • Sensitive reception down to -148 dBm with programmable transmit power up to 22 dBm
  • Reliable packet handling with preamble detection, CRC and 256-byte data engine

Purpose & Audience

The LORDWORLD SX1262 LoRa Node Module adds long-range wireless communication to Raspberry Pi Pico series boards. It targets makers and engineers building battery-powered IoT sensors or remote monitoring nodes that require LoRaWAN protocol support across selectable frequency bands.

Installation & Common Issues

The module plugs directly into the Pico header, and a PH1.25 connector with an onboard recharge controller simplifies adding a lithium battery. Careful antenna placement is required to achieve the stated sensitivity; incorrect frequency-band selection for the local region will prevent network join, and the 256-byte packet limit means firmware must fragment larger payloads.

Fit & Alternatives

This board suits developers who need extreme-temperature stability from the compensated crystal oscillator and programmable output up to 22dBm for maximum range. It is not a fit for projects demanding higher data rates, larger single-packet payloads, or integrated Wi-Fi or Bluetooth connectivity.

أبرز المميزات

  • Stable timing in extreme temperatures with active temperature-compensated crystal oscillator
  • Ultra-long range communication via FSK, GFSK and LoRa modulations with strong block resistance
  • Battery-powered operation through PH1.25 header with built-in recharge controller for Lithium cells
  • Sensitive reception down to -148 dBm with programmable transmit power up to 22 dBm
  • Reliable packet handling with preamble detection, CRC and 256-byte data engine

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

How can I verify the module is transmitting after wiring it to my Pico?

Confirm operation by observing successful packet transmission at up to 22 dBm output power and reception down to -148 dBm sensitivity using a LoRaWAN gateway or another node.

What does the package include and what must I source separately?

The module provides the SX1262 radio, active temperature-compensated crystal oscillator, PH1.25 battery header with recharge controller, and LoRa/FSK/GFSK support; you must supply a Raspberry Pi Pico series board and a rechargeable lithium battery.

Which frequency-band version should I select for my region?

Select the version whose operating band matches the LoRaWAN frequency plan approved for your country.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.