نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver aluminium dual-bay enclosure with USB-C port, holds one M.2 NVMe and one 2.5 or 3.5 inch SATA drive

MAIWO

MAIWO K3525N Dual-Bay NVMe & SATA Enclosure Silver

SKU CH-AY7X-QQQB4

Holds one M.2 NVMe drive and one 2.5 or 3.5 inch SATA drive, clones offline between them, and connects via USB 3.1 Type-C at up to 10Gbps

  • ColorSilver
  • TypeM.2 NVMe SSD & 3.5/2.5 Inch SATA HDD/SSD Enclosure
  • AC AdapterYes
  • MaterialAluminum
  • External InterfaceUSB 3.1 Type-C
  • HDD Count SupportedM.2 NVMe SSD & 3.5/2.5 Inch SATA HDD/SSD Enclosure
  • Dual-bay design holds M.2 NVMe and 2.5/3.5 SATA drives
  • Offline clone copies NVMe to SATA or SATA to NVMe without a PC
  • USB 3.1 Gen 2 reaches 10 Gbps for NVMe transfers
  • Aluminium body dissipates heat and auto-sleep saves power
  • Includes 12 V adapter plus USB-C and USB-A cables

Dual-Bay M.2 NVMe & SATA Enclosure

The MAIWO K3525N is a new external enclosure that holds one M.2 NVMe SSD and one 2.5 or 3.5 inch SATA drive simultaneously. It connects via a USB 3.1 Type-C interface and includes a 12 V DC power adapter for stable operation. Offline cloning between the two bays is supported without a host computer. The aluminium chassis provides passive heat dissipation and an auto-sleep function.

Suits users needing dual-drive access

This unit serves technicians and creators who want to read, write or clone between an NVMe stick and a SATA hard drive or SSD using a single dock. The toggle switch selects SATA-to-NVMe or NVMe-to-SATA clone direction. Buyers who require active cooling, more than two bays, or a different host interface should consider other solutions. No driver installation is needed for Windows, macOS or Linux.

USB 3.1 Gen 2 10 Gbps host interface

The enclosure’s external link runs at up to 10 Gbps, allowing the NVMe bay to reach that ceiling while the SATA bay tops out at 6 Gbps. Both USB Type-C to Type-C and Type-C to Type-A cables are supplied for broad device compatibility. This bandwidth figure is the decisive spec for deciding whether the dock matches your workflow speed requirements.

أبرز المميزات

  • Dual-bay design holds M.2 NVMe and 2.5/3.5 SATA drives
  • Offline clone copies NVMe to SATA or SATA to NVMe without a PC
  • USB 3.1 Gen 2 reaches 10 Gbps for NVMe transfers
  • Aluminium body dissipates heat and auto-sleep saves power
  • Includes 12 V adapter plus USB-C and USB-A cables

المواصفات

BrandMAIWO
ModelK3525N
ColorSilver
TypeM.2 NVMe SSD & 3.5/2.5 Inch SATA HDD/SSD Enclosure
AC AdapterYes
MaterialAluminum
External InterfaceUSB 3.1 Type-C
HDD Count SupportedM.2 NVMe SSD & 3.5/2.5 Inch SATA HDD/SSD Enclosure
Number of Bay2
Maximum Capacity (per Bay)Up to 10TB
FanNo
SpecificationsM.2 NVMe SSD & 3.5/2.5 Inch SATA HDD/SSD Enclosure with Offline Clone

أسئلة حول هذا المنتج

Will my 2280 NVMe drive and 3.5 inch SATA drive both fit in the two bays?

Yes, one bay accepts M.2 NVMe drives in sizes 2230, 2242, 2260 and 2280, while the other bay takes 2.5 or 3.5 inch SATA drives.

How do I confirm the USB 3.1 Gen 2 link is running at 10 Gbps after I connect it?

Check the operating system device manager or system report to verify the connection is negotiated at 10 Gbps and that UASP is active on supported Windows versions.

Does the package include both USB cables and the 12 V power adapter so I can start cloning without extra purchases?

The box supplies a USB C to C cable, a USB C to A cable and a 12 V DC power adapter for standalone operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.