EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
MAXSUN
12GB GDDR6X GPU with 5888 CUDA cores, 2475MHz boost clock, PCIe 4.0 x16, HDMI 2.1, three DisplayPort 1.4 outputs and a 200W TDP
The MAXSUN GeForce RTX 4070 Terminator W 12G is a graphics card built on the NVIDIA Ada Lovelace architecture with 5888 CUDA cores and 12GB of GDDR6X memory. It targets gamers and creators who need high frame rates at 1440p or entry-level 4K. The AD104 GPU runs at a 1920 MHz base clock and can boost to 2475 MHz within a 200 W TDP envelope.
A one-button switch on the card changes the RGB lighting pattern without requiring additional software. The pulse alloy reinforced backplate adds structural rigidity and helps dissipate heat from the memory modules. These features are cosmetic and structural; they do not alter clock speeds, power limits or thermal thresholds.
The card uses a PCI Express 4.0 x16 connection, so bandwidth halves to 3.0 speeds if installed in an older platform. Display outputs consist of one HDMI 2.1 port and three DisplayPort 1.4 connectors, supporting up to 7680 x 4320 resolution across four monitors. An 8-pin power connector and a 650 W power supply are required for stable operation.
| Brand | MAXSUN |
|---|---|
| Series | Terminator |
| Model | RTX 4070 W 12G |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 40 Series |
| GPU | GeForce RTX 4070 |
| Core Clock | 1920MHz |
| Boost Clock | 2475MHz |
| CUDA Cores | 5888 |
| Effective Memory Clock | 21000 MHz (21 Gbps) |
| Memory Size | 12GB |
| Memory Interface | 192-Bit |
| Memory Type | GDDR6X |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4 |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Operating Systems Supported | System requirements Windows 10 👉Check gaming pc with Windows 11 Pro |
| Thermal Design Power | 200W |
| Recommended PSU Wattage | 650W |
| Power Connector | 8-Pin |
| Features | Support Simultaneous Multi-ProjectionVR image correction technology, VRWorks Audio virtual reality audio technology, Ansel screenshot function, PhysX physics acceleration technology, NVIDIA CUDA, NVIDIA REFLEX, PureVideo HD HD hardware decoding, dynamic super resolution, MFAA, GeForce 3D Vision, GameWorks™ , G-Sync™-Ready, GameStream™-Ready, GeForce ShadowPlay™, GPU Boost™ |
| Max GPU Length | 250 mm |
| Card Dimensions (L x H) | 250 × 124 mm |
| Slot Width | 2.3 Slots |
Dust the heatsink and fans every 6 to 12 months; the all-metal backplate and pulse alloy frame do not require replacement.
The GPU throttles once the core reaches its factory temperature target, which is the first limit hit under sustained 200W load.
The Terminator cooler uses three fans and a reinforced backplate to move 200W of heat; expect moderate fan noise and exhaust temperatures typical for a 200W design.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟