SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Maxtor
200GB 3.5" desktop hard drive with 7200 RPM, 8MB cache and SATA 1.5Gb/s interface
The Maxtor DiamondMax 10 6L200M0 is a 200GB 3.5" internal hard drive with a SATA 1.5Gb/s connection. It spins at 7200 RPM and includes 8MB of cache for desktop storage tasks. The bare-drive unit suits system builders upgrading older SATA platforms or replacing a failed primary drive.
A fluid dynamic bearing motor keeps acoustic output low during continuous operation. Native command queuing reorders requests to maintain throughput when multiple threads access the disk. The Shock Protection System and Data Protection System guard platters and data integrity under prolonged vibration or sudden movement.
The 1.5Gb/s link caps maximum sequential transfer well below modern SATA revisions, so large file copies run slower than on 3Gb/s or 6Gb/s ports. Average seek time of 9ms and latency of 4.17ms reflect the mechanical design rather than the interface ceiling. Builders needing higher sustained bandwidth should note this bottleneck.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L200M0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 200GB |
| RPM | 7200 RPM |
| Cache | 8MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| وزن الشحنة | 0.63 kg |
| أبعاد الطرد | 203 × 152 × 51 mm |
The fluid dynamic bearing motor is designed for quiet operation, keeping acoustic output low even during continuous workloads.
You need a standard SATA data cable and a 15-pin SATA power connector from your power supply to install this 3.5" drive.
Yes, the drive is backward compatible with earlier SATA controllers, though performance will be limited to the controller's maximum transfer rate.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟