نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Mean Well

Mean Well NES-100-9 100.8W 9V 11.2A power supply

SKU CH-P0AR-VJRTV

Enclosed AC-DC switching supply delivers 100.8 W at 9 V and 11.2 A for low-power systems

  • TypeAT
  • 8 W output powers demanding 9 V equipment
  • 2 A continuous current supports stable operation
  • Enclosed AT-type chassis protects internal components
  • New-generation switching design reduces overall volume
  • Two-year quality assurance backs long-term reliability

What the NES-100-9 delivers

This Mean Well unit is a 100.8 W enclosed switching supply that converts AC mains to a regulated 9 V output at 11.2 A. It targets integrators who need a compact, single-rail DC source for industrial equipment, test benches or custom low-voltage systems.

Installation notes and common pitfalls

The AT-type form factor fits standard chassis cut-outs and uses screw terminals for both input and output wiring. Installers should verify the AC voltage selector before powering on; a mismatched setting is the most frequent cause of start-up failure. Allow adequate airflow around the enclosure because the fanless design relies on convection cooling.

Behaviour under continuous load

At full 100.8 W the supply maintains stable voltage with minimal ripple thanks to the updated switching topology. Thermal protection engages if the case temperature exceeds the internal limit, automatically resetting once the unit cools. Efficiency stays consistent over long runs, so the output current remains reliable for extended test cycles or permanent installations.

أبرز المميزات

  • 8 W output powers demanding 9 V equipment
  • 2 A continuous current supports stable operation
  • Enclosed AT-type chassis protects internal components
  • New-generation switching design reduces overall volume
  • Two-year quality assurance backs long-term reliability

المواصفات

TypeAT

أسئلة حول هذا المنتج

How can I confirm the NES-100-9 is delivering 9V at 11.2A after installation?

Measure the output terminals with a multimeter under load; a reading near 9V and current draw up to 11.2A shows the unit is operating within its 100.8W rating.

What ships with the NES-100-9 and what must I source separately?

The box contains the enclosed switching power supply only; AC mains cable, mounting hardware and any load-side connectors are not included.

Which NES-100 variant should I select for a 9V 100W project?

Choose the NES-100-9 model, rated for 9V at 11.2A and 100.8W, matching the voltage and power requirement directly.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.