نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
2.5 inch U.2 enterprise NVMe SSD with silver metal casing

Micron

Micron 9200 PRO 3.84TB 2.5" U.2 NVMe Enterprise SSD

SKU CH-F94M-5VQN7

A 3.84 TB U.2 enterprise NVMe SSD delivering 3500 MB/s reads, 3100 MB/s writes and 840,000 random read IOPS for low-latency data-centre workloads

  • Form Factor2.5" U.2
  • Capacity3.84TB
  • InterfacePCI-Express 3.0
  • Max Sequential ReadUp to 3500 MBps
  • Max Sequential WriteUp to 3100 MBps
  • 4KB Random ReadUp to 840,000 IOPS
  • 84TB capacity stores massive enterprise datasets
  • 3500 MBps sequential read accelerates data-intensive workloads
  • 3100 MBps sequential write enables fast data ingestion
  • 840000 IOPS random read delivers low-latency access
  • 2000000 hours MTBF ensures long-term drive reliability

3.84TB U.2 NVMe drive for enterprise servers

The Micron 9200 PRO is a 3.84TB 2.5" U.2 NVMe enterprise SSD built for performance-critical cloud and data centre workloads. It connects via PCI-Express 3.0 and uses triple-level cell flash. The drive is new and designed for internal server installation where consistent throughput and low write latency are required.

Sustained write performance and latency

Under sustained load the drive delivers up to 3100 MBps sequential write and up to 170,000 IOPS 4KB random write. Its architecture targets the lowest average write latency in the market to maintain throughput during heavy enterprise workloads. Active power consumption is 3.3W and MTBF is rated at 2,000,000 hours.

U.2 form factor and PCIe 3.0 interface

The 2.5" U.2 form factor and PCI-Express 3.0 NVMe interface determine compatibility with drive bays and backplanes. Buyers who need a different physical connector or a newer PCIe generation must select another drive.

أبرز المميزات

  • 84TB capacity stores massive enterprise datasets
  • 3500 MBps sequential read accelerates data-intensive workloads
  • 3100 MBps sequential write enables fast data ingestion
  • 840000 IOPS random read delivers low-latency access
  • 2000000 hours MTBF ensures long-term drive reliability

المواصفات

BrandMicron
Part NumberMTFDHAL3T8TCT
Form Factor2.5" U.2
Capacity3.84TB
InterfacePCI-Express 3.0
Max Sequential ReadUp to 3500 MBps
Max Sequential WriteUp to 3100 MBps
4KB Random ReadUp to 840,000 IOPS
4KB Random WriteUp to 170,000 IOPS
MTBF2,000,000 hours
Power Consumption (Active)3.3W

أسئلة حول هذا المنتج

How much power does the 9200 PRO draw when it runs continuously in a server?

The drive consumes 3.3W during active operation, so a full-day workload adds minimal heat and keeps cooling requirements low.

Does my server need a U.2 backplane and a PCIe 3.0 lane to install this 2.5" SSD?

Yes, the 9200 PRO uses a 2.5" U.2 connector and requires a PCIe 3.0 x4 link; without both the drive cannot communicate with the system.

Will the 3.84TB 9200 PRO work in a chassis that only has older PCIe 2.0 U.2 bays?

The SSD is built for PCIe 3.0; it will fall back to PCIe 2.0 speeds but you lose the 3500 MBps read and 3100 MBps write ceiling.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.