نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

MINUTEMAN

MINUTEMAN RPM158N1LCD-HW PDU 15A 8-outlet 5-15R LCD IP-addressable

SKU CH-HN31-QRCEC MPN RPM158N1LCD-HW

Eight-outlet PDU with IP-addressable remote on/off/reset control, local LCD monitoring and hardwire input for 100-120VAC circuits

  • TypePower Distribution Units
  • StyleHorizontal Installation, 0U Vertical Installation
  • Certifications62368-1 Certification
  • Maximum Input Current15A
  • Input Connector(s)Hardwire
  • Cord Length10 ft
  • Remote power control via built-in web server
  • Local LCD shows real-time amps, IP address, temperature and humidity
  • Flexible 1U horizontal or 0U vertical mounting options
  • Hardwired 10 ft input with 8 NEMA 5-15R outlets
  • 15 A input rating, 16 A max load, 20 A breaker protection

What this PDU is and who it serves

The MINUTEMAN RPM158N1LCD-HW is an IP-addressable power distribution unit with eight 5-15R receptacles and a local LCD display. It accepts a hardwired 10 ft input cord rated for 15 A at 100-120 VAC and mounts horizontally in 1U or vertically in 0U orientation. The unit is certified to 62368-1 and includes a 20 A input circuit breaker for overload protection.

Sustained-load behaviour and monitoring

The PDU supports a maximum continuous output current of 15 A with a 16 A peak load capacity before the 20 A breaker trips. Its built-in web server enables remote on/off/reset control of individual outlets while logging up to 5000 entries each for power consumption and event data. Environmental sensors report amperage, temperature and humidity on the LCD and via SNMP or email alerts.

Checks before ordering

Verify that your facility can provide a hardwired 15 A branch circuit at 100-120 VAC and that the 10 ft input cord reaches the connection point. Confirm rack space for either 1U horizontal or 0U vertical mounting and ensure your network infrastructure supports IPv4/IPv6, SNMP v1/v2c/v3 or SSH for remote management. Buyers needing outlet-level metering or IEC output connectors should consider other models.

أبرز المميزات

  • Remote power control via built-in web server
  • Local LCD shows real-time amps, IP address, temperature and humidity
  • Flexible 1U horizontal or 0U vertical mounting options
  • Hardwired 10 ft input with 8 NEMA 5-15R outlets
  • 15 A input rating, 16 A max load, 20 A breaker protection

المواصفات

BrandMINUTEMAN
ModelRPM158N1LCD-HW
TypePower Distribution Units
StyleHorizontal Installation, 0U Vertical Installation
Certifications62368-1 Certification
Maximum Input Current15A
Input Connector(s)Hardwire
Cord Length10 ft
Output Connector(s)Rear Panel Receptacles: (8) 5-15R
Maximum Output Current15A
Overload ProtectionInput Circuit Breaker Protection
FeaturesIP-addressable Remote Power Manager
Built-in Web Server to support Remote Power Management
Event Notifications via Email or SNMP Traps
Local LCD displays Amps, IP Address, Temperature and/or Humidity
Daily, Weekly, Monthly & Yearly Power Consumption Data
10/100 Base-T Ethernet Port
IPv4, IPv6 Support and SNMP Support (v1,v2c,v3)
Telnet, SSH Encryption Support
Radius Authentication
User Account for Three Different Permissions Management Systems
Alarm Notification via Email, SNMP, Syslog, LED or Audible Alarm
SSL Web Browser for Set Up and Operation
IP Address Filtering
Maximum 5,000 E
وزن الشحنة3.18 kg
أبعاد الطرد505 × 211 × 89 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How much heat and noise does the 15 A hardwired PDU produce when running continuously at full load?

The unit draws a maximum of 15 A at 100-120 VAC with a 20 A input breaker and no fan is mentioned, so heat output is limited to the circuit losses and audible noise is negligible.

What must already be in the rack for the hardwired input and eight 5-15R outlets to function?

You need a dedicated 15 A branch circuit with hardwire termination, a 10/100 Ethernet drop for the IP-addressable manager, and devices fitted with NEMA 5-15P plugs to use the eight rear receptacles.

Will the IP-addressable manager and LCD still work if I keep older 10/100 switches and IPv4-only monitoring tools?

Yes, the built-in web server supports IPv4, IPv6, SNMP v1/v2c/v3, Telnet and SSH, so legacy 10/100 networks and IPv4-only management systems remain compatible.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.