نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four square magnetic dust filters with fine PVC mesh in thin metal frames

MoKo part_B07R4XZK52 140mm Magnetic Dust Filter 4-Pack Fan Accessory

SKU CH-A2QX-K2B4Q MPN part_B07R4XZK52

Four magnetic 140 mm mesh filters snap onto any steel case or PSU intake to stop dust while keeping airflow high

  • certificationtrue
  • features4PCS x 140*140mm
  • includedpart_B07R4XZK52
  • weight0.02 pounds
  • dimensions5.51 in x 5.51 in x 0.08 in
  • materialMetal
  • Washable PVC mesh lasts longer and cleans with soap and water
  • Magnetic frame attaches to metal chassis instantly without tools or screws
  • Four 140 mm filters cover intake fans and power-supply vents
  • Ultra-fine 1 mm holes block dust while maintaining airflow
  • Lightweight 5.51 in square design adds only .02 lb per filter

Magnetic 140mm Fan Filter 4-Pack

This four-pack supplies 140mm magnetic dust filters that attach directly to any steel chassis or power-supply intake. The PVC mesh uses a 1mm hole pattern to stop dust while letting air pass. Each filter measures 5.51 by 5.51 by .08 inches and weighs .02 pounds.

Sustained Airflow and Dust Capture

The fine mesh maintains its open area after weeks of dust buildup, so case pressure stays stable during long gaming or rendering sessions. Because the frame is magnetic, the filter can be lifted off in seconds for a quick rinse without breaking the seal or misaligning the mount.

Replaces Screw-On or Adhesive Filters

Builders who currently use screw-mounted grilles or sticky-backed mesh gain tool-free removal and a tighter seal on metal panels. The upgrade is worth it when filter cleaning is frequent or when case access is limited by tight cable routing.

أبرز المميزات

  • Washable PVC mesh lasts longer and cleans with soap and water
  • Magnetic frame attaches to metal chassis instantly without tools or screws
  • Four 140 mm filters cover intake fans and power-supply vents
  • Ultra-fine 1 mm holes block dust while maintaining airflow
  • Lightweight 5.51 in square design adds only .02 lb per filter

المواصفات

BrandMoKo
Modelpart_B07R4XZK52
certificationtrue
features4PCS x 140*140mm
includedpart_B07R4XZK52
weight0.02 pounds
dimensions5.51 in x 5.51 in x 0.08 in
materialMetal

أسئلة حول هذا المنتج

Will the 1mm PVC mesh restrict airflow or raise temperatures when the PC runs all day?

The ultra-fine mesh is designed to reject dust without sacrificing heat dissipation, so temperatures stay stable even during continuous operation.

Does my case need screw holes or a metal frame for these magnetic filters to attach?

The magnetic frame clings directly to any steel chassis around a 140mm fan opening; no screw holes or extra brackets are required.

Can I use these on an older case that has 140mm mounts but thinner steel panels?

Yes, they fit any standard 140mm fan size and the magnets hold through typical case panel thicknesses.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.