EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Montech
White ATX mid-tower with reversible layout, vertical GPU support and chimney airflow for up to 420 mm graphics cards and 360 mm top radiator
Options HS01 PRO Mesh White
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Montech HS01 PRO (W) is a white mid-tower case built from SPCC steel and tempered glass. Its reversible layout lets the glass panel sit on either the left or right side, so the interior is always visible. ARGB lighting with 29 modes is included. The chassis supports ATX, Micro ATX and Mini ITX motherboards.
Verify that your graphics card does not exceed 420 mm in length and that your CPU cooler stays under 175 mm in height. The power supply must be no longer than 200 mm. For liquid cooling, the top mount accepts radiators up to 360 mm long with a maximum width of 123 mm, while the rear and bottom support 120 mm units. The case provides 14 expansion slots and drive bays for two 3.5" and two 2.5" drives.
This case suits builders who want a clean side view, vertical GPU mounting without extra brackets, and chimney-style airflow from bottom intake to top exhaust. The relocated PSU area helps back-connect motherboards hide cables. Buyers who need more than two 3.5" drive bays or a smaller footprint should consider other options.
| Brand | Montech |
|---|---|
| Part Number | HS01 PRO (W) |
| Color | White |
| Case Material | SPCC / Tempered Glass |
| Motherboard Compatibility | ATX / Micro ATX / Mini ITX |
| LED | ARGB |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 14 |
| Fan Options | Bottom - 3 x 120mm / Front - 3 x 120mm / Rear - 2 x 120mm / Top - 3 x 120mm |
| Radiator Options | Bottom - Up to 120mm / Rear - Up to 120mm / Top - Up to 360mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 200 mm |
| Dimensions | 18.91" x 9.45" x 18.91" |
| وزن الشحنة | 15.29 kg |
| أبعاد الطرد | 584 × 559 × 330 mm |
The case supports bottom, front, rear and top 120 mm fan mounts plus a 29-mode ARGB system; fans and any separate controller are not included.
The top supports up to 360 mm radiators with a 123 mm width limit; choose 360 mm for maximum coolant surface or 120 mm if clearance is tight.
It accommodates current high-end cards including the RTX 50 series, leaving room for power connectors and cable routing.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
No language matches that.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟