OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
MSI
Micro-ATX board for 8th and 9th Gen Intel CPUs, two DDR4 slots up to 2666 MHz, one PCIe 3.0 x16 slot, four SATA ports, USB 3.1 Gen1, 7.1 audio and Gigabit LAN
This MSI motherboard uses the Intel H310 chipset and the LGA 1151 socket to support Intel Core 9th Gen, 8th Gen, Pentium Gold and Celeron processors. It fits micro-ATX cases and provides two DDR4 memory slots with a maximum capacity of 32 GB at speeds up to 2666 MHz. Core Boost and DDR4 Boost circuitry aim to deliver stable power and clean signal integrity for everyday computing and gaming builds.
This board suits builders assembling a cost-focused system around an 8th or 9th Gen Intel processor who need basic expansion with one PCIe 3.0 x16 slot and two PCIe 2.0 x1 slots. It is not for users who require more than two memory slots, four SATA ports, or advanced overclocking features absent from the H310 chipset. Buyers needing integrated graphics output must avoid F-suffix CPUs, as the VGA port will not function with those models.
The decisive specification is the two-slot DDR4 layout capped at 32 GB maximum memory. This ceiling determines whether the board can meet the capacity needs of the intended workload, especially for users planning 16 GB modules or future upgrades beyond 32 GB.
| CPU Type | Intel Core 9th Gen (LGA 1151) |
|---|
Core Boost uses a fully digital power layout with premium components to support multi-core CPUs efficiently, which helps keep VRM temperatures lower and fan noise minimal during sustained workloads.
The board requires a 24-pin ATX main power connector and an 8-pin ATX 12V CPU power connector; both must be present for the system to boot.
Four SATA 6Gb/s ports accept existing SATA SSDs and hard drives, while two PCIe 2.0 x1 slots and one PCIe 3.0 x16 slot run older expansion cards at their native speeds.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟