نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular metal power supply with large side fan and multiple cable connectors

myVolts

myVolts 2000W Mining Power Supply 1800W Rated 16x 6+2 Pin 8 GPU

SKU CH-T81J-BRNSG

A new 2000 W peak AT power supply rated at 1800 W with 16 PCIe 6+2 pin connectors for up to eight graphics cards

  • TypeAT
  • Durable metal chassis built for continuous mining loads
  • 14 cm high-airflow fan keeps temperatures low under full load
  • 16 PCIe 6+2 pin connectors power eight GPUs from one unit
  • Active PFC with 170-240 V input range suits global mains supplies
  • Up to 93 % conversion efficiency reduces electricity cost per hash

Mining Power Supply for 8 GPU Rigs

This 1800 W rated unit delivers up to 2000 W maximum output for cryptocurrency mining systems. It provides sixteen 6+2 pin connectors to power eight graphics cards simultaneously. The 20+4 pin, 8 pin, eight SATA and three IDE connectors cover the remaining components. It is built for miners who need dense multi-GPU power in a single enclosure.

Thermals Noise and Power Draw

A 14 cm fan moves air through the metal chassis to manage heat during continuous operation. Active PFC and a 170-240 V input range with 47/63 Hz frequency support stable mains conversion. The +12 V rail supplies 128 A while the unit targets up to 93 % conversion efficiency. Input current is rated at 15 A at low line and 8 A at high line.

Sixteen 6+2 Pin Connectors for Eight Cards

The sixteen 6+2 pin outputs are the single specification that determines whether this unit fits a build; each GPU requires two such connectors so the count matches an eight-card configuration exactly. Builders needing more than eight GPUs or a different connector mix must choose another power source. The 1800 W continuous rating sets the practical load ceiling for sustained mining workloads.

أبرز المميزات

  • Durable metal chassis built for continuous mining loads
  • 14 cm high-airflow fan keeps temperatures low under full load
  • 16 PCIe 6+2 pin connectors power eight GPUs from one unit
  • Active PFC with 170-240 V input range suits global mains supplies
  • Up to 93 % conversion efficiency reduces electricity cost per hash

المواصفات

TypeAT

أسئلة حول هذا المنتج

How do I connect the 20+4 pin and 16 6+2 pin cables to my mining motherboard and eight GPUs?

Plug the single 20+4 pin connector into the motherboard, then run each of the sixteen 6+2 pin cables to one GPU power socket; the unit supports eight graphics cards with two cables per card.

Which parts will need cleaning or replacement after months of continuous mining?

The 14 cm fan is the only moving component; plan to clean its blades and intake mesh regularly and replace the fan if bearing noise appears.

At what load does the 12 V rail hit its 128 A limit during sustained operation?

The +12 V rail delivers up to 128 A, so the limit is reached when total GPU draw approaches 1800 W rated output under continuous load.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.