نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular bench power supply unit with front LCD display and control knobs

myVolts

myVolts MCH-K3205D Power Supply 110V 0-30V 5A 160W

SKU CH-3CXC-GW0PW MPN MCH-K3205D

Adjustable 0-30 V, 5 A switching supply with over-voltage, over-temperature and anti-shock protection plus milliamp resolution for repair and DIY work

  • TypeAT
  • Adjustable 0-30 V output covers diverse repair tasks
  • 5 A maximum current supports phone board testing and DIY projects
  • 160 W power capacity handles demanding experimental loads
  • ±0.5 % display accuracy gives reliable voltage and current readings
  • CE certified with over-voltage, over-temperature and anti-shock protection

Bench power for repair and prototyping

The myVolts MCH-K3205D is a switching DC regulated supply delivering 0-30V at up to 5A for a maximum of 160W. It targets technicians repairing mobile devices, engineers running ageing tests and hobbyists building experimental circuits. Overvoltage, over-temperature and anti-shock protection guard the load and the unit itself.

Steady output during long sessions

Efficiency exceeds 85% and ripple stays at 20mA peak-to-peak, so the output remains clean when the supply runs continuously at high current. Voltage and current readouts hold ±0.5% accuracy on the LCD screen, letting you trust the displayed values throughout extended ageing or burn-in runs without drift.

Replaces basic fixed-voltage adapters

If you currently rely on single-rail wall warts or unregulated bricks, this unit adds continuously adjustable voltage, current limiting and precise metering in one box. The step up is worthwhile when a project demands repeatable millamp-level control or when safety shut-offs must protect delicate phone mainboards during fault finding.

أبرز المميزات

  • Adjustable 0-30 V output covers diverse repair tasks
  • 5 A maximum current supports phone board testing and DIY projects
  • 160 W power capacity handles demanding experimental loads
  • ±0.5 % display accuracy gives reliable voltage and current readings
  • CE certified with over-voltage, over-temperature and anti-shock protection

المواصفات

TypeAT

أسئلة حول هذا المنتج

How much ripple and noise does the 160 W output produce during extended use?

The unit specifies a peak-to-peak ripple and noise figure of 20 mA, which remains consistent at the full 160 W rating.

What mains voltage must my bench provide for the 110 V model to operate?

The supply accepts a 110 V input at either 50 Hz or 60 Hz, so a standard 110 V outlet is sufficient.

Will the ±0.5 % display accuracy hold when I power a legacy 5 V logic board?

Yes, the voltage and current readout maintains ±0.5 % accuracy across the entire 0-30 V range, including 5 V loads.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.