نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

myVolts

myVolts RSP-500-12 500W 12V Enclosed Power Supply

SKU CH-ZPH7-K0STP

Enclosed 500 W AC-DC power supply delivering 12 V at 41.7 A with active PFC, up to 90.5 % efficiency, and built-in fan cooling

  • TypeAT
  • 500W single output for industrial automation equipment
  • 12V 41.7A DC output with up to 90.5% efficiency
  • Universal 85-264Vac input with built-in active PFC
  • Forced air cooling by built-in DC fan up to 70°C
  • Remote ON-OFF control, remote sense and DC OK signal

Industrial 500 W 12 V power supply

The myVolts RSP-500-12 is a 500 W single-output enclosed AC/DC unit that delivers 12 V at 41.7 A. It is built for factory automation, test and measurement instruments, laser equipment and burn-in facilities that need a reliable 12 V rail.

Forced-air cooling with 90.5 % efficiency

A built-in DC fan provides forced-air cooling up to 70 °C ambient. High efficiency up to 90.5 % and active PFC keep input current low across the 85-264 Vac range, reducing heat and noise in normal operation.

Remote control and protection features

Remote ON/OFF, remote sense and a DC OK signal simplify integration into control cabinets and automated lines. Short-circuit, overload, over-voltage and over-temperature protections guard connected equipment.

أبرز المميزات

  • 500W single output for industrial automation equipment
  • 12V 41.7A DC output with up to 90.5% efficiency
  • Universal 85-264Vac input with built-in active PFC
  • Forced air cooling by built-in DC fan up to 70°C
  • Remote ON-OFF control, remote sense and DC OK signal

المواصفات

TypeAT

أسئلة حول هذا المنتج

How do I mount the RSP-500-12 and connect the AC input, and what is the common wiring mistake?

Mount the enclosed unit on a flat surface with screws through its four corner holes, then wire the AC terminals to a 85-264Vac supply; the frequent error is reversing live and neutral on the input block.

Which component will need replacement first during continuous operation?

The built-in DC fan is the only moving part and will wear out before the solid-state circuitry under sustained load.

At what ambient temperature does the 12V 41.7A output start to derate?

The unit is rated for full 500W output up to 70°C; above that temperature the protection circuitry reduces power to prevent overheating.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.