نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-72-24 Radio 24V 3A 72W Power Supply

SKU CH-D407-W0GB0

A 24 V 3 A switch-mode supply with overload, over-voltage and short-circuit protection for radio, CCTV and automation equipment

  • TypeAT
  • High efficiency and low DC ripple for stable radio operation
  • Operates down to 0 °C with a long service life
  • High insulation strength ensures safe industrial use
  • 100 % full-load burn-in test before shipping
  • circuit, overload and overvoltage protection built in

24V 3A 72W Radio Power Supply

This myVolts unit delivers a regulated 24 V DC output at up to 3 A, providing 72 W of continuous power. It accepts a universal AC input range of 100 to 240 V, making it suitable for global use. The aluminium alloy enclosure relies on natural convection cooling without a fan. Protections include short circuit, overload, and overvoltage safeguards.

Who This Suits and Who It Does Not

Installers powering 24 V radio equipment, LED strips, CCTV cameras, or 3D printer heated beds will find the voltage and current rating a direct match. The screw terminals allow secure wiring in industrial automation or computer engineering projects. Buyers who need more output current or a higher total wattage should look at a larger supply. Builders requiring forced-air cooling for sustained high-temperature operation will need a different design.

The Deciding Specification

The fixed 24 V DC output at 3 A (72 W) is the single figure that determines compatibility. Your load must not exceed 3 A continuous draw, and the device you are powering must be rated for 24 V. The adjustable voltage trim (+V/ADJ) allows minor calibration but does not change the fundamental 24 V rail.

أبرز المميزات

  • High efficiency and low DC ripple for stable radio operation
  • Operates down to 0 °C with a long service life
  • High insulation strength ensures safe industrial use
  • 100 % full-load burn-in test before shipping
  • circuit, overload and overvoltage protection built in

المواصفات

TypeAT

أسئلة حول هذا المنتج

What AC voltage range must the wall outlet provide for the myVolts S-72-24 to operate?

The unit accepts AC 100–240 V input, so any standard mains supply within that range will power it.

If I keep my existing 24 V DC radio equipment, will the S-72-24’s 3 A output and low ripple be compatible?

Yes, it delivers DC 24 V at up to 3 A with low ripple, matching typical 24 V radio gear and providing overload, overvoltage and short-circuit protection.

How can I verify the supply is working correctly after wiring L, N, GND and V?

Measure the output terminals with a multimeter; you should read approximately 24 V DC (adjustable via the +V/ADJ terminal) and the unit should run within its 0–40 °C operating temperature.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.