NEMIX RAM
NEMIX RAM 1TB 8x128GB DDR5 5600MHz CL46 2Rx4 1.1V ECC RDIMM memory upgrade
- 1TB (8 x 128GB)
- 288-Pin DDR5 RDIMM
31,026.99 US$
0.39681532BTC
متوفر
NEMIX RAM
NEMIX RAM 1.1TB 12x96GB DDR5 5600 CL46 ECC RDIMM GIGABYTE MZ33-AR1 memory upgrade
A 1.1 TB DDR5 ECC registered DIMM kit with twelve 96 GB modules running at 5600 MT/s CL46, validated for the Gigabyte MZ33-AR1 motherboard
- Capacity1.1TB (12 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
Size 1.1TB 12X96GB
- 1TB total capacity across 12 modules of 96GB each
- DDR5 5600 speed with CL46 latency at 1.10V for rated performance
- Registered ECC architecture with 2Rx4 rank for full-slot stability and error correction
- 288-pin RDIMM form factor matched to GIGABYTE MZ33-AR1 motherboard requirements
- Major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability
Capacity and fit
This kit delivers 1.1 TB of DDR5 memory across twelve 96 GB RDIMMs built for the GIGABYTE MZ33-AR1 motherboard. Registered ECC design meets the demands of virtualization hosts, database servers and high-thread-count compute nodes.
Registered ECC advantage
It replaces unbuffered UDIMM or non-ECC modules that cannot populate every slot at full speed on this platform. The 2Rx4 registered architecture lets the memory controller drive all twelve slots at 5600 MT/s while ECC corrects single-bit errors before they cause data corruption or reboots.
Installation checks
Modules use the standard 288-pin DDR5 RDIMM form factor and operate at 1.10 V, but the board enforces a strict population order that varies by CPU configuration. Consult the motherboard manual for the approved slot sequence and maximum supported capacity per processor before seating the DIMMs.
أبرز المميزات
- 1TB total capacity across 12 modules of 96GB each
- DDR5 5600 speed with CL46 latency at 1.10V for rated performance
- Registered ECC architecture with 2Rx4 rank for full-slot stability and error correction
- 288-pin RDIMM form factor matched to GIGABYTE MZ33-AR1 motherboard requirements
- Major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K12 |
| Capacity | 1.1TB (12 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | GIGABYTE |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
إصدارات أخرى من هذا الطراز
5 أخرى من الفئة نفسها
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 1.1TB 12x96GB CL46 GIGABYTE MZ73-LM0 memory upgrade
- 1.1TB (12 x 96GB)
- 288-Pin DDR5 RDIMM
31,213.99 US$
0.39920693BTC
متوفر
NEMIX RAM
NEMIX RAM 1TB (8 x 128GB) DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H14SHM
- 1TB (8 x 128GB)
- 288-Pin DDR5 RDIMM
31,429.99 US$
0.40196943BTC
متوفر
NEMIX RAM
NEMIX RAM 1.1TB 12x96GB DDR5 5600MHz CL46 2Rx4 ECC RDIMM memory upgrade
- 1.1TB (12 x 96GB)
- 288-Pin DDR5 RDIMM
31,513.99 US$
0.40304374BTC
متوفر
NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 1.1TB (12x96GB) CL46 2Rx4 1.1V 288-Pin Kit for GIGABYTE MA34-CP0 memory upgrade
- 1.1TB (12 x 96GB)
- 288-Pin DDR5 RDIMM
31,530.99 US$
0.40326116BTC
متوفرأسئلة حول هذا المنتج
Will the 288-pin RDIMM modules fit the DIMM slots on my GIGABYTE MZ33-AR1 motherboard?
Yes, the kit uses 288-pin DDR5 RDIMM form factor, which is the exact slot type required by the GIGABYTE MZ33-AR1 motherboard.
What is the correct population order for installing all 12 modules on the GIGABYTE MZ33-AR1?
Install modules following the motherboard manual's approved DIMM population sequence; the kit is spec-matched to the board's memory-population rules for full 1.1TB capacity.
Do these RDIMMs require any firmware updates or ongoing maintenance after installation?
No firmware updates are needed for the memory itself; ensure the motherboard BIOS is current for DDR5 5600 support, and the ECC registered design handles error correction automatically.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.0050133BTC
متوفر
