SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00499579BTC
متوفر
NEMIX RAM
NEMIX RAM 1.5TB 16x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Kit Supermicro H13SSH
1.5 TB DDR5-5600 ECC RDIMM kit with 16×96 GB modules, CL46, 1.1 V, 2Rx4, validated for Supermicro H13SSH
- Capacity1.5TB (16 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 5 TB total capacity from 16 matched 96 GB modules
- DDR5 5600 speed runs at rated PC5-44800 bandwidth
- Registered ECC design corrects single-bit errors for data integrity
- 2Rx4 rank layout matches Supermicro H13SSH population rules
- Low 1.1 V operation reduces server power draw
Exact-match DDR5 upgrade
This 1.5 TB kit contains 16 modules of 96 GB each, built as 288-pin DDR5 RDIMMs with ECC and registered buffering. It runs at 5600 MT/s (PC5-44800) with CL46 latency at 1.1 V and a 2Rx4 rank layout. The specification matches the Supermicro H13SSH motherboard so the controller recognises the full capacity and operates at rated speed.
Registered ECC replaces unbuffered DIMMs
The registered architecture offloads the memory controller, allowing every slot to be populated at full capacity while ECC corrects single-bit errors on the fly. This jump is worth it when a server needs maximum density and data integrity without unplanned reboots caused by silent corruption. Builders using unbuffered UDIMMs or SODIMMs cannot use this kit because the form factor and electrical interface differ.
DDR5 platform constraint
DDR5 RDIMMs require a motherboard that supports the 288-pin registered interface and the specific population rules of the H13SSH. If the board or BIOS does not validate this exact rank, voltage and timing combination, the modules will not train at 5600 MT/s. Always consult the system manual for approved DIMM order and maximum supported capacity before installation.
أبرز المميزات
- 5 TB total capacity from 16 matched 96 GB modules
- DDR5 5600 speed runs at rated PC5-44800 bandwidth
- Registered ECC design corrects single-bit errors for data integrity
- 2Rx4 rank layout matches Supermicro H13SSH population rules
- Low 1.1 V operation reduces server power draw
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
Will these 288-pin DDR5 RDIMMs fit the DIMM slots on my Supermicro H13SSH motherboard?
Yes, the 288-pin RDIMM form factor matches the slots on the Supermicro H13SSH. The kit is spec-matched to that board's memory population rules and registered architecture.
What is the correct installation order for the 16 modules in this 1.5TB kit?
Install the 16 modules following the population sequence in the Supermicro H13SSH manual. The step often missed is using the exact slot order the board requires for full 1.5TB recognition at DDR5-5600.
Do the modules in this 1.5TB kit need any firmware updates or battery replacements over time?
No firmware updates or battery replacements are required for these DDR5 RDIMMs. ECC corrects single-bit errors automatically, and the registered design maintains signal integrity across all 16 slots for the module lifespan.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
