NEMIX RAM 128GB DDR5 5600 CL46 4Rx4 ECC RDIMM server RAM
- 128GB
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
A single 128GB DDR5 module running at 4800MHz with ECC and registered buffering for server stability
Capacity 128GB
This registered DDR5 module provides 128GB of error-correcting memory for servers and workstations. It operates at 4800 speed with CL40 latency and runs at 1.10V. The 4Rx4 organisation and 288-pin form factor suit dense, mission-critical deployments.
Replacing smaller registered modules with this single 128GB stick increases total memory without consuming extra slots. The jump is worthwhile when workloads exceed current capacity or when ECC protection becomes mandatory for data integrity.
The module requires a motherboard with DDR5 RDIMM slots and registered memory support. No heat spreader is fitted, so airflow across the PCB must be adequate. ECC and registration free the system from single-bit errors and reduce electrical load on the memory controller.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Memory Motherboard Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module uses the standard 288-pin DDR5 RDIMM form factor and 1.10V voltage, so it fits any server motherboard that accepts registered DDR5 ECC memory.
Align the notch with the slot key, press firmly until both retention clips click, then verify in BIOS that the 4Rx4 rank and CL40 timing are recognised.
The memory has no heat spreader or moving parts; it requires no firmware updates or scheduled replacements if operated within the rated 1.10V specification.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟