نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SVW-NT memory upgrade

SKU CH-3B9M-PMTG9

128 GB DDR5-4800 ECC registered RDIMM built for the Supermicro H13SVW-NT, running at 1.1 V with CL40 latency

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

عرض 12 تكوينات إضافية

Speed 4800MHz

  • Exact DDR5-4800 CL40 1.10V spec match for rated speed
  • 128GB 2Rx4 Registered ECC prevents silent data corruption
  • 288-pin RDIMM form factor fits Supermicro H13SVW-NT
  • Major OEM Samsung Micron Hynix chips ensure enterprise stability
  • Lifetime replacement warranty with free US-based technical support

Supermicro H13SVW-NT DDR5 upgrade

This 128 GB DDR5 registered ECC module is built for the Supermicro H13SVW-NT motherboard. It delivers the exact 288-pin RDIMM form factor, 2Rx4 rank structure, 1.10 V voltage and CL40 timing the board's memory controller expects for full-speed operation.

128 GB capacity and registered headroom

The single DIMM provides 128 GB of addressable memory while the registered architecture buffers address and command signals so the controller stays stable when every slot is populated. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads. Systems that require unbuffered UDIMMs or SODIMMs cannot use this module.

CL40 latency at DDR5-4800 decides fit

The module runs at 4800 MT/s (PC5-38400) with a CAS latency of 40 cycles. If your server's qualified-vendor list specifies a different latency or speed bin, the memory controller may downclock the DIMM or refuse to boot. Verify the exact CL40 requirement in your system manual before ordering.

أبرز المميزات

  • Exact DDR5-4800 CL40 1.10V spec match for rated speed
  • 128GB 2Rx4 Registered ECC prevents silent data corruption
  • 288-pin RDIMM form factor fits Supermicro H13SVW-NT
  • Major OEM Samsung Micron Hynix chips ensure enterprise stability
  • Lifetime replacement warranty with free US-based technical support

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will this 128GB DDR5 4800 CL40 2Rx4 ECC RDIMM work in my Supermicro H13SVW-NT motherboard alongside existing DDR5 modules?

This module is spec-matched to the Supermicro H13SVW-NT memory controller with 1.1V operation, CL40 timing, and 2Rx4 registered architecture. For mixed populations, consult your motherboard manual for approved DIMM population order and supported capacity configurations.

How can I verify the 128GB DDR5 4800 CL40 ECC RDIMM is running at its rated 4800MHz speed after installation?

Enter the system BIOS or UEFI and check the memory information screen. It should report DDR5 4800 (PC5-38400), CL40 latency, 1.10V voltage, and 128GB total capacity with ECC active.

Does the 128GB DDR5 4800 CL40 2Rx4 ECC RDIMM kit include a heat spreader or any installation tools?

The package contains the 128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V CL40 288-pin ECC Registered RDIMM only. No heat spreader or tools are included; the module uses bare chips and installs directly into the 288-pin RDIMM slots.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.