NEMIX RAM DDR5 128GB 6400MHz CL52 4Rx4 1.1V ECC RDIMM Supermicro X14SDV-42C-SP3F memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
128GB DDR5-6400 ECC registered RDIMM built for the Supermicro X14SDW-36CE-SP9F motherboard
This 128GB registered ECC module matches the board's required 288-pin DDR5 6400 specification, including 4Rx4 organisation, CL52 latency and 1.1V operation. It is intended for administrators upgrading that specific motherboard to its full rated capacity.
Registered buffering reduces electrical load on the memory controller, allowing every slot to remain fully populated at 6400 MT/s without down-clocking. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during long-running compute or database tasks.
The kit ships without a heat spreader, relying on the server chassis airflow the X14SDW-36CE-SP9F was designed for. Installation follows the board's validated population order; the 288-pin RDIMM keying physically prevents insertion of incompatible UDIMM or SODIMM types.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-744K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module operates at 1.10V, the standard DDR5 voltage, so power draw scales with the 6400 MT/s data rate and 4Rx4 density; actual watts depend on your workload and the X14SDW-36CE-SP9F memory controller.
You need a Supermicro X14SDW-36CE-SP9F motherboard with free 288-pin RDIMM slots and a BIOS that supports 4Rx4 registered ECC DIMMs at DDR5 6400; consult the board manual for approved slot order and maximum capacity per channel.
Mixing is only reliable when every installed DIMM matches the same 6400 MT/s speed, 1.10V voltage, CL52 latency, 4Rx4 rank structure and registered ECC specification; otherwise the memory controller will down-clock or disable slots.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟