BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00280092BTC
متوفر
NEMIX RAM
NEMIX RAM 16GB 1Rx8 DDR4 3200 CL22 260-Pin SODIMM Kingston KVR32S22S8/16 memory upgrade
A 16 GB DDR4 SODIMM module running at 3200 MHz with CL22 latency for Kingston-compatible laptops and all-in-one PCs
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity lifts multitasking headroom for everyday workloads
- DDR4 3200 speed matches Kingston KVR32S22S8/16 spec for drop-in compatibility
- CL22 latency at 1.2 V keeps power draw low in thin laptops
- 260-pin SODIMM form factor fits standard DDR4 laptop slots without adapters
- Built with major-brand DRAM chips and stress-tested for stable operation
Capacity and form factor
This NEMIX RAM module provides 16 GB of DDR4 memory in a 260-pin SODIMM form factor. It operates at 3200 MT/s with a CAS latency of CL22 and runs at 1.2 V. The module uses a 1Rx8 rank configuration and is built with unbuffered, non-ECC chips from major OEM suppliers.
Compatibility and limitations
It suits laptops and all-in-one PCs that accept DDR4 SODIMM modules matching the Kingston KVR32S22S8/16 specification. Systems requiring ECC error correction, registered buffering, or a different pin count cannot use this module. Buyers needing higher capacity per slot or lower latency timings should look elsewhere.
Sustained workload behaviour
All modules are stress tested under load to verify stability during extended operation. The unbuffered design and standard 1.2 V voltage support consistent throughput for typical productivity and multitasking scenarios. Thermal performance relies on the host system's cooling as no heat spreader is fitted.
أبرز المميزات
- 16 GB capacity lifts multitasking headroom for everyday workloads
- DDR4 3200 speed matches Kingston KVR32S22S8/16 spec for drop-in compatibility
- CL22 latency at 1.2 V keeps power draw low in thin laptops
- 260-pin SODIMM form factor fits standard DDR4 laptop slots without adapters
- Built with major-brand DRAM chips and stress-tested for stable operation
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | Kingston Laptop, AIO All-in-One PC Compatible Series Memory |
| Model | Kingston DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-618K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Kingston |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
أسئلة حول هذا المنتج
Does my laptop need a free 260-pin DDR4 SODIMM slot for this 1Rx8 module to install?
Yes, the module is a 260-pin DDR4 SODIMM and requires an available slot of that type in the laptop.
Will this CL22 stick run at the same speed if I keep an existing CL22 DDR4 3200 module in the other slot?
Both modules share the DDR4 3200 speed and CL22 latency, so the system will operate at those timings when paired.
How can I confirm the new memory is recognised at 3200 MT/s and CL22 after fitting it?
Check the system BIOS or a tool such as CPU-Z; it should report 3200 MT/s, PC4-25600 bandwidth and CAS latency 22 for the installed module.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
