نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green SODIMM modules side by side, bare circuit boards with gold edge connectors

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 SODIMM for POSIFLEX TX-2300 memory upgrade

SKU CH-VNA0-Y6R9A

DDR4 2666 SODIMM kit adds 16 GB across two 8 GB modules for the POSIFLEX TX-2300

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB dual-channel kit boosts POSIFLEX TX-2300 responsiveness
  • DDR4 2666 CL19 timing matches system specifications
  • 20V low-voltage modules reduce power draw
  • 260-pin SODIMM form factor fits Mini-PC slots directly
  • Major OEM Samsung Micron Hynix chips ensure stability

POSIFLEX TX-2300 memory kit

This NEMIX RAM kit supplies 16 GB of DDR4 2666 memory in two 8 GB SODIMM modules built for the POSIFLEX TX-2300 Mini-PC. The dual-rank 2Rx8 design runs at 1.2 V with CL19 latency and uses major OEM chips from Samsung Micron or Hynix.

Shops upgrading POSIFLEX TX-2300 units

It fits technicians who need a matched pair for the TX-2300 controller and want straightforward installation. It is not for systems that require ECC registered DIMMs or a different pin count and it does not suit builds needing higher speed grades.

16 GB dual-channel capacity

The 2x8 GB layout fills both slots on supported TX-2300 boards and handles typical point-of-sale workloads with headroom for multitasking. It runs out when applications demand more than 16 GB or when the platform requires faster than DDR4 2666 operation.

أبرز المميزات

  • 16GB dual-channel kit boosts POSIFLEX TX-2300 responsiveness
  • DDR4 2666 CL19 timing matches system specifications
  • 20V low-voltage modules reduce power draw
  • 260-pin SODIMM form factor fits Mini-PC slots directly
  • Major OEM Samsung Micron Hynix chips ensure stability

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT

أسئلة حول هذا المنتج

What type of motherboard slot does the 260-pin DDR4 SODIMM kit require?

The kit uses 260-pin DDR4 SODIMM slots, which are the standard socket for this form factor in compatible systems.

Will the CL19 modules run reliably with existing DDR4 2666 memory already installed?

Yes, the CL19 2Rx8 modules operate at 1.20V and match the DDR4 2666 (PC4-21300) specification, so they will interleave with identical-speed memory.

How can I confirm the 16GB kit is recognised at the correct speed after installation?

Check the system BIOS or OS memory information; it should report 16GB total capacity running at 2666 MT/s with CL19 timings.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.