نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4-2933 CL21 1Rx8 1.2V 260-pin SODIMM kit for Supermicro X12SCV-W/LVDS

SKU CH-NEPK-RVNES

A 16 GB dual-channel DDR4-2933 SODIMM kit with CL21 timing and 1.2 V operation, validated for Supermicro X12SCV-W and X12SCV-LVDS motherboards

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 SODIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 16GB 2X8GB

  • Exact-fit 16 GB DDR4-2933 kit for Supermicro X12SCV boards
  • Dual-rank 1Rx8 modules run at rated CL21 without manual tuning
  • 2 V operation keeps power draw low for mobile workloads
  • Major OEM Samsung, Micron or Hynix chips tested at 2933 MHz
  • 260-pin SODIMM form factor matches the required laptop slot

Exact-match SODIMM kit for Supermicro X12SCV

This NEMIX RAM kit provides 16 GB (2 x 8 GB) of DDR4-2933 memory in the 260-pin SODIMM form factor. It is specced at CL21 latency and 1.2 V for the Supermicro X12SCV-W and X12SCV-LVDS motherboards. The 1Rx8 Non-ECC Unbuffered configuration matches the board's memory controller expectations.

OEM chips in a plain SODIMM package

Modules use major OEM Samsung, Micron or Hynix components without a heat spreader. The 260-pin edge connector fits only SODIMM slots, not desktop UDIMM sockets. Unbuffered design means the memory connects directly to the controller for standard laptop or embedded system operation.

Verify slot count and population rules

Check the system manual for supported capacities, approved population order and installation steps before ordering. This kit will not fit desktop motherboards that require 288-pin UDIMM modules. Buyers needing ECC or registered memory should look elsewhere.

أبرز المميزات

  • Exact-fit 16 GB DDR4-2933 kit for Supermicro X12SCV boards
  • Dual-rank 1Rx8 modules run at rated CL21 without manual tuning
  • 2 V operation keeps power draw low for mobile workloads
  • Major OEM Samsung, Micron or Hynix chips tested at 2933 MHz
  • 260-pin SODIMM form factor matches the required laptop slot

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered SODIMM Memory
Part NumberMS23400-818K2
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 SODIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 260-PIN Non-ECC SODIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What DDR4 speed and CAS latency does this 16GB SODIMM kit run at?

The kit operates at DDR4-2933 (PC4-23400) with a CAS latency of CL21, matching the memory controller specifications for the Supermicro X12SCV-W and X12SCV-LVDS motherboards.

What physical slot and form factor are required to install these modules?

Each 8GB module uses the 260-pin DDR4 SODIMM form factor, which fits the SO-DIMM slots on the Supermicro X12SCV-W and X12SCV-LVDS boards — not a desktop UDIMM slot.

How do I install the two sticks in the correct population order?

Consult the Supermicro X12SCV-W or X12SCV-LVDS manual for the approved slot population sequence; install the first module in the primary slot indicated, then add the second module in the next designated slot to ensure dual-channel operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.