NEMIX RAM 8GB DDR4 2933 CL21 1.20V 260-Pin SODIMM
- 8GB
- 260-Pin DDR4 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
Dual-channel 16 GB DDR4 2933 MHz CL21 SODIMM kit runs at 1.2 V for laptops, AIOs and small-form-factor systems
Capacity 16GB (2 x 8GB)
This NEMIX RAM kit provides 16 GB of DDR4 memory in two 8 GB modules. It targets laptops, all-in-one PCs, small-form-factor desktops and NAS devices that accept 260-pin SODIMMs. The modules are non-ECC and unbuffered for standard consumer platforms.
Each module runs at 1.20 V with a CL21 latency at 2933 MHz. The absence of a heat spreader keeps the profile thin for tight chassis, while the reduced voltage limits thermal output during typical workloads.
The 260-pin form factor plugs straight into SODIMM slots without adapters or cables. No extra power connectors or cooling hardware are required, leaving internal space and power budget untouched for other components.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS23400-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Align the notch on each 8 GB module with the slot key, insert at an angle, then press down firmly until both retention clips click; the step many miss is verifying both clips lock.
No scheduled maintenance is required; the modules are non-ECC and unbuffered, so if a stick fails it is replaced as a unit rather than repaired.
The CL21 latency at 1.20 V is the primary constraint; thermal throttling can occur before speed drops because the kit has no heat spreader.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟