نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular DDR4 memory module with gold edge connectors and black chips on both sides

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 ECC Unbuffered UDIMM CL17 2Rx8 memory upgrade

SKU CH-KP9H-CX6GZ

16 GB DDR4 2400 ECC unbuffered UDIMM CL17 2Rx8 for compatible workstations

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection safeguards data integrity for critical workloads
  • 2400 MHz DDR4 speed delivers responsive system performance
  • 16 GB single-module capacity simplifies upgrade planning
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard workstation slots

16GB DDR4 ECC UDIMM for workstations

This 16GB NEMIX RAM module runs at DDR4 2400 with CL17 latency and 1.2V operation. It uses a 2Rx8 Hynix-based design on a 288-pin unbuffered UDIMM with error-correcting code. The part is built for compatible workstation and server platforms.

Suits ECC UDIMM slots at 2400 speed

Builders needing registered DIMMs or non-ECC memory should choose a different module. Systems limited to speeds below 2400 or requiring a heat spreader will not match this specification. Capacity is fixed at a single 16GB rank configuration.

Key spec: 2Rx8 ECC unbuffered at CL17

The 2Rx8 organisation with ECC and unbuffered signalling at CL17 determines motherboard compatibility. Verify the platform accepts 2Rx8 unbuffered ECC UDIMMs before purchase. This single factor decides if the module will function correctly.

أبرز المميزات

  • ECC protection safeguards data integrity for critical workloads
  • 2400 MHz DDR4 speed delivers responsive system performance
  • 16 GB single-module capacity simplifies upgrade planning
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard workstation slots

المواصفات

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2666MHZ ECC Unbuffered UDIMM
Part NumberME19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 2666MHZ ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 288-PIN ECC Unbuffered UDIMM

أسئلة حول هذا المنتج

Should I choose the 16 GB module or look for a different capacity?

The only capacity offered for this part number is 16 GB, supplied as a single 288-pin UDIMM running at DDR4 2400 with CL17 latency and 1.2 V operation.

What does the DDR4 2400 rating mean once the module is installed in my workstation?

The module will run at 2400 MT/s, delivering PC4-19200 bandwidth with a CAS latency of 17 cycles at the standard 1.2 V DDR4 voltage.

How does the 288-pin DDR4 ECC UDIMM interface affect compatibility and speed limits?

The 288-pin unbuffered ECC UDIMM fits DDR4 motherboard slots that support ECC; the JEDEC DDR4 2400 standard caps the data rate at 2400 MT/s unless the board explicitly allows higher speeds.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.