نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with gold edge connector and black memory chips

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 ECC RDIMM Dell PowerEdge C4140 memory upgrade

SKU CH-EXPV-FX18K

Adds 16 GB of DDR4 ECC registered memory at 2933 MHz to Dell PowerEdge C4140 servers

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity in critical workloads
  • Registered design stabilises signal quality on dense server boards
  • 16 GB capacity expands memory headroom for virtualisation
  • 2933 MT/s speed matches Dell PowerEdge C4140 specifications
  • 2 V operation reduces power draw per module

Dell PowerEdge C4140 memory upgrade

This 16GB DDR4 2933 ECC RDIMM module is built for the Dell PowerEdge C4140 server. It delivers registered error-correcting memory that helps maintain data integrity in demanding workloads. The single 2Rx8 rank design fits a standard 288-pin slot and runs at 1.2V.

Who should buy this and who should not

This module suits administrators expanding memory in a compatible Dell PowerEdge C4140. It is not for desktop PCs, laptops or consumer motherboards that require unbuffered non-ECC DIMMs. Buyers needing higher capacities per slot or different speeds should verify their platform requirements first.

Deciding specification: registered ECC DDR4 2933

The registered ECC DDR4 2933 interface with CL21 latency determines compatibility. Only systems that accept 288-pin RDIMM modules at this speed and voltage will recognise the memory. Check your server documentation before ordering.

أبرز المميزات

  • ECC protection guards data integrity in critical workloads
  • Registered design stabilises signal quality on dense server boards
  • 16 GB capacity expands memory headroom for virtualisation
  • 2933 MT/s speed matches Dell PowerEdge C4140 specifications
  • 2 V operation reduces power draw per module

المواصفات

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-628K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

أسئلة حول هذا المنتج

Should I choose the 16 GB single module or add multiple sticks for the PowerEdge C4140?

This is a single 16 GB 2Rx8 registered ECC RDIMM; populate the C4140 DIMM slots in matched sets per channel following the server's memory configuration guide for optimal bandwidth.

What does the DDR4 2933 speed rating deliver inside the C4140?

The module runs at DDR4 2933 (PC4-23400) with CL21 latency at 1.2 V, providing the maximum rated throughput the C4140 memory controller supports for registered ECC DIMMs.

How does the 288-pin RDIMM interface limit installation options?

The 288-pin DDR4 RDIMM form factor fits only registered ECC DIMM slots; it cannot be used in unbuffered UDIMM slots or in systems requiring LRDIMM or 260-pin SO-DIMM modules.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.