نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 PC4-23400 CL21 1Rx8 1.2V 288-pin UDIMM memory upgrade

SKU CH-FAP2-TV43G

16 GB DDR4 2933 PC4-23400 CL21 1Rx8 1.2 V 288-pin UDIMM for Supermicro workstations

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 2933 boosts SuperMicro workstation speed
  • CL21 1.2V timing balances latency with low power draw
  • 1Rx8 single-rank design keeps signal integrity clean
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Major-brand Samsung Micron Hynix chips ensure stable operation

16GB DDR4 module for Supermicro systems

This 16GB DDR4 2933 UDIMM is built for Supermicro desktop and workstation platforms such as the SuperWorkstation 5039AD-I and motherboards like the MBD-C9X299-PGF. It arrives new as a single 1Rx8 rank stick running at 1.2V with CL21 timing. The unbuffered non-ECC design matches the memory slots on these qualified boards.

Sustained workload behaviour

Modules are stress tested under load to verify stability during extended compute sessions. The major-brand DRAM from Samsung Micron or Hynix maintains the rated 2933 MT/s data rate without throttling. Unbuffered operation keeps latency predictable for multi-threaded applications running continuously.

Build and connector details

The 288-pin UDIMM form factor fits standard DDR4 DIMM slots on the target Supermicro chassis such as the CSE-GS5A-754. No heat spreader is present so clearance inside dense enclosures remains unimpeded. Installation follows the motherboard manual and requires no additional configuration in the BIOS.

أبرز المميزات

  • 16GB DDR4 2933 boosts SuperMicro workstation speed
  • CL21 1.2V timing balances latency with low power draw
  • 1Rx8 single-rank design keeps signal integrity clean
  • 288-pin UDIMM fits standard desktop DIMM slots
  • Major-brand Samsung Micron Hynix chips ensure stable operation

المواصفات

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-618K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM

أسئلة حول هذا المنتج

How much power does the 16GB DDR4 2933 module draw when the system runs all day?

The module operates at 1.2V, the standard DDR4 voltage, so power draw stays low during continuous workloads.

What motherboard slot must I already have for this 288-pin UDIMM to work?

A DDR4 UDIMM slot — 288 pins, unbuffered, non-ECC — is required for installation.

Will this CL21 stick run stably alongside older DDR4 modules I keep in the other slots?

Yes, it is a standard DDR4 2933 CL21 1Rx8 UDIMM; the motherboard will negotiate a common speed and latency for all installed modules.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.